User's Manual

iCON
®
452 User Guide
Version: v007ext Page: 18 of 28
To create a new message, press the “New” button. The New SMS Message window opens and you can start
typing your message (maximum 160 characters). To send the message, fill in the recipient’s telephone number
and click “Send”. If you prefer to send your message at a later time click the “Save” button which automatically
stores your message in the Unsent folder for later use.
Figure 17: New Message
To delete a message, select it as explained above, and press the “Delete” button.
9.5.2 Network Selection
GlobeTrotter
®
Connect 3 will automatically select a network for you. However, you can select a network
manually. To do this, simply choose “Network Selection” via the “More” button and select “Manual”.
GlobeTrotter
®
Connect 3 will start scanning for available networks (this may take several minutes). Once the
scan is completed, the “Select” button will allow you to choose a network. In a similar way you can go back to
Automatic mode.
9.5.3 Auto (Re)Connect
If “Auto Connect” is selected, GlobeTrotter
®
Connect 3 will try to connect as soon as the network and
GlobeTrotter
®
Connect 3 are available. If a connection is dropped, GlobeTrotter
®
Connect 3 will try to re-
establish the connection as soon the network is available again.
If the you manually Disconnect (press the “Disconnect” button), the Auto Connect feature is disabled until you
re-launch GlobeTrotter
®
Connect 3.
Figure 18: Activating Auto Connect
Note: Auto Connect only works on the Home network.