User's Manual

iCON
®
452 User Guide
Version: v007ext Page: 6 of 28
5 INSTALLING AND SETTING UP YOUR iCON
®
452
Step 1 – Remove the SIM-slot cover and insert the SIM card into the iCON
®
452. If you want to use the iCON
®
452 as a memory stick, you need to insert a micro-SD card (not included). The micro-SD card slot is also
located under the SIM-slot cover. Slide in your micro-SD card and close the cover again.
IMPORTANT! Only insert/remove the SIM or micro-SD card while the iCON
®
452 is not powered up.
Step 2 – Start up your computer. Slide out the USB connector while holding the slide button down until it clicks
into the locking position.
IMPORTANT! To slide the USB connector back inside the modem, use the slider mechanism. Pushing hard on
the USB connector without unlocking the slider might damage your iCON
®
452.
Step 3 – Then insert the iCON
®
452 into a USB slot on your computer.
NOTE! Your iCON
®
452 includes the unique Zero-CD
®
feature from Option
®
. By inserting the device into your
PC, the software and driver installation will start automatically.