Integration Manual

Integration Manual

Author:

Roeland Timmermans

Version:

Creation Date:

May 26, 2005

Page:

4 of 4

Option Confidential:

This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of

Option NV.

3. RF Connector

When it is desired to use the datacard in conducted mode it is necessary to use the

output RF connector. To connect to the output use the R299.792.000 RF connector

(manufacturer Radiall).

4. SAR Safety measures

Concerning specific safety guidelines we advise the end-user to keep a minimum

distance of 20 cm between himself and the device.

5. FCC label

When the card is integrated into the new equipment it must still have the original

FCC-ID label developed by Option N.V.

If the FCC ID in not visible when the card is installed inside another device, then the

outside of the complete device into which the card is installed must also display a

label referring to the enclosed card.

This exterior label can use wording such as the following: “Contains FCC ID

NCMOGL3QS”.