User's Manual

2. Safety Measurements
Please read the following guidelines carefully. Not following these guidelines can cause
harm to the card, yourself or other persons.
2.1 General recommendations for use
 Always treat your product with care and keep in a clean and dust-free place. Do not
expose your product to open flames or lit tobacco products.
 Do not expose to liquid, moisture or humidity. Do not expose the datacard to rain, or
other liquids.
 Do not drop, throw or try to bend your product.
 Do not paint your product.
 Do not attempt to disassemble your product. Doing so may be dangerous and it will
void the warranty.
 Do not touch the antenna unnecessarily.
2.2 Traveling
Handle the card with care while traveling. It is recommended to remove the card from the
laptop.
2.3 Ambient temperatures
Do not expose the datacard or the antenna to ambient temperatures beyond the range of
-25 and +50 degrees Celsius.
2.4 Explosive atmosphere
Turn off your PC in any area with a potentially explosive atmosphere. It is rare, but your
PC could generate sparks, which could cause an explosion or fire. Areas with a
potentially explosive atmosphere are not always clearly marked. They include fuelling
areas (petrol filling stations), below deck on boats, fuel or chemical transfer or storage
facilities, and areas where the air contains chemicals or particles, such as grain, dust, or
metal powders. Do not transport or store your PC and accessories in the compartment of a
vehicle, which contains flammable gas, liquid, or explosives.
2.5 Blasting areas – construction sites
Turn off your PC when in a blasting area in order to avoid interfering with two-way
radios used in blasting operations.