User's Manual

Managing Profiles

The configuration dialogue for WLAN profiles works like the configuration dialogue

for UMTS or GSM connections. The user selects the desired profile from the list at

the top and can modify the different parameters in the panes in the middle. Some

common operations are available in the tool bar at the bottom.

> To create a new profile, the user clicks the button “New” at the bottom of the

configuration screen. All settings in a new profile are set to their default values

until changed by you.

> By clicking “Delete” the selected profile is removed from the list. A profile may be

deleted only if it’s not currently being used for communication.

> The user can save any changes to the current pane (including any changes to

other panes) immediately by clicking “Save”. This button is only available when

the data on the current or another pane has been changed.

NOTE: If you are using the profile that has been modified then the changes will not

come into effect until you have stopped the connection and restarted it.

getting started

WLAN (only available on cards supporting WLAN)

First time using WLAN

You can access the WLAN page by clicking:

> The WLAN button on the top toolbar

> The WLAN icon on the upper left navigation bar

> WLAN in the view menu

The WLAN page allows you to create, edit and configure a WLAN connection.

Also, when a connection is present, this can be started from there. In the top

of the screen you have a list of all available connections.

getting started