User's Manual

2 OVERVIEW
The Module Development Kit consists of a main PEPIJN Cradle board which provides a
standard USB interface, a SIM card holder and an external power supply for the GlobeTrotter
Modules. With this cradle it is possible to connect the GTM card to any standard USB host
controller.
Points of interest:
1. Option PCI Express Mini Card
2. PCI Express connector
3. 8/16 bit CODEC jumper: see section 9
4. 1.8 Volt LED indication
5. USB power LED: indicates that USB is connected and powered
6. Power LED: indicates that the GTM module is powered with 3.3 Volts
7. Registration and USB activity LED: indicates that the module has registered to the
mobile network when it burns continuously. Also indicates USB communication
activity when the LED is blinking
8. USB connector and cable
9. Power plug and cable
10. Audio jack and headset
11. RF connector and cable
12. Module locking mechanism
13. External antenna
Figure 1: Pepijn Cradle with module and accessories
8
9
10
5
13
12
11
1
2
3
4
6
7
G L O B E T R O T T E R Q U I C K S TA R T G U I D E
PAGE: 4 of 30
AUTHOR: G. Van Overbeke | CREATION DATE: Aug 8, 2006 | VERSION: v01-f3
[ OPTION CONFIDENTIAL ]