User's Manual

(7) Now the next window will appear. Modify the Bit per second field to 115200 and click OK.
Figure 30: Connection Properties
HyperTerminal is configured and you are now ready issue AT commands to the PCI Express
Mini Card module. Figure 31 shows a typical HyperTerminal session. If you don’t have visual
feedback of what you are typing, you need to turn echo on by typing ATE1 followed by enter
first as shown in below example.
G L O B E T R O T T E R Q U I C K S TA R T G U I D E
PAGE: 19 of 30
AUTHOR: G. Van Overbeke | CREATION DATE: Aug 8, 2006 | VERSION: v01-f3
[ OPTION CONFIDENTIAL ]