User's Manual

Power Switch – Turns the device on and off. To turn your
device on, slide the switch to the left and release. The Home
screen will appear when the device is ready for use. To turn
the device off, slide the switch to the left and hold for two
seconds. The device will turn itself off.
If your device does not turn on or has frozen, reset it by
sliding the power switch to the left and holding it for three
seconds.
Key Lock – Locks the buttons on the device. Slide the power
switch to the right to lock the device.
USB Port – Charges the device. To charge the battery,
connect the device into a computer or wall adapter accessory
using the included USB cable. Plug the wall adapter into an
electrical outlet. The light above the flipbar will turn orange
indicating that the battery is charging. Continue charging
until the indicator light turns green. The device can be used
while charging.
The device can be connected to a computer to transfer
content. If the USB port on your computer also supplies
power, the device will charge using the connection. When
the device is connected to your computer, you will not be
able to use it. Eject the device drive from your computer to
resume use.