User's Manual

3. Apply double sided tape, or other adhesive, to the back of the Qlvr Box and affix to
the wall at an approximate height of 150-175 cm from the floor. If the surface is not
suitable for tape, you can attach the device by inserting metal screws into the pre-
fabricated holes inside the unit casing (screws not provided)
Note. When installing multiple Qlvr Boxes throughout any given area, be sure to
record the serial number of the Qlvr Box (located inside at the bottom) along with a
unique room indicator such as a specific room number or name of your choosing.
Recording of time and attendance
1. Hold the NFC card/tag against the "Optiqo Qlvr Box" logo below the screen until
such time that the device emits a beeping sound. The screen will then flash, and the
clock will automatically update to the current time.
Note: If the Qlvr Box is programmed to calculate the IN/OUT function (time and
attendance), be sure that it displays "IN" on the screen when you tag your arrival and
"OUT" when you tag that you are exiting the premises or terminating your shift.
Legend
Data uploading is in progress (20-30 seconds).
Note: During the upload, no new tagging (registrations) can be recorded.
______________________________
The upload was successful.
______________________________