- Optiview, Inc. DVR User Manual

User’s Manual
17
3.4 System Date / Time Setting
User can set the current date, time and other OSD parameters in Date/Time
Menu. In OSD Main Menu, select <System Setup> and press ENTER, then
select <Date/Time> to access the Date/Time Menu; the menu displays as
follows.
Date/Time
1. Date
2. Time
3. Date/Time Display
4. Date Display Mode
5. Time Display Mode
6. Date/Time Order
7. Daylight Saving Time
8. DST Start
9. DST End
10. DST Bias
2005/02/21
10:39:26
1 Row
Y/M/D
24 HR
Date First
ON
Apr, 1 st Sun, 02:00
Apr, Last Sun, 02:00
60 Min
3.4.1 Set Date / Time
Set Date / Time
Select <Date/ Time> and press ENTER for adjusting the settings. LEFT /
RIGHT keys are used here to move the cursor to previous or next field,
press ENTER for selecting, and UP / DOWN for changing the value of
the selected field.
NOTE: The reset date / time setting applies to video recorded
after the date/ time adjusting; the date and time of previously
recorded video will not be changed.
NOTE: Once the date / time setting has been changed, We
strongly recommend to purge the video stored in the database
immediately to avoid record database corruption.
Date / Time Display
Users are allowed to choose to set the date / time OSD displays in 1 or 2
rows. The default is to display the date / time OSD in one row.