- Optiview, Inc. DVR User Manual

User’s Manual
25
The four windows on the top-left play back the recorded video of channel 1 to
channel 4, respectively, and the rest windows display the live image of
channel 1 to channel 4.
4.2 Call Monitor Control
Users are allowed to use the Versatile MPEG-4 DVR unit front panel to
control a call monitor display without having to access the Main Menu. Two
viewing modes, including Sequence display and Single camera display, can
be performed through the call monitor. To program the call monitor sequence,
see section 5.5 Sequence Setup.
Follow the steps to control your call monitor.
• Press the CALL key on the front panel to enter call monitor control mode,
the message “Call Mode” will be shown on the bottom-left corner of the
screen.
Press 1-8 Key To Select Channel
Press SEQ To Enable Sequence
Call Mode
• Press CHANNEL key to display the associated camera on call monitor.
• Alternatively, press SEQ repeatedly to display the sequence of cameras
previously programmed in <Call Monitor Schedule> Menu.
• Press ESC to return to Main monitor control mode.