DVR Server Manual ver.5.05/rel.092507 VR Enterprise DVR System DVR Server (ver.5.
DVR Server Manual ver.5.05/rel.092507 Contents Chapter1 Start up and Main Interface ··························································· 2 1.1 Start up ····················································································································· 2 1.2 Main Interface ·········································································································· 2 1.2.
DVR Server Manual ver.5.05/rel.092507 Chapter3 IP Camera Setup ·········································································· 38 3.1 Functional buttons ·································································································· 38 3.2 Server setup ············································································································ 39 3.
DVR Server Manual ver.5.05/rel.092507 Chapter7 Appendixes ·················································································· 68 7.1 Appendix A: Fast key reference ············································································· 68 7.2 Appendix B: Audio preview··················································································· 69 7.3 Appendix C: Update drivers of compressed card ·················································· 70 7.
DVR Server Manual ver.5.05/rel.092507 Thank you for purchasing VR Enterprise series DVR system. This User manual is designed to inform you how to setup the DVR system and explain each function for you to make the most out of the system professionally and meet your security recording needs. IMPORTANT! Operators of the VR Enterprise series DVR system must thoroughly read this manual prior to using the system.
DVR Server Manual ver.5.05/rel.092507 Chapter1 Start 1.1 Start up and Main Interface up 1).Before you run the DVR server, please make sure all devices are firmly connected. Left-Double-Click shortcut icon 1.2 Main to start it. The main interface is as follows: Interface 1.2.1 Show tips 1. When the mouse moves closely or stops above a button, a text tip will be shown to interpret its function. 2.
DVR Server Manual ver.5.05/rel.092507 1. Full screen Single-Right- Click image area, it will popup a menu, then select ―full screen‖ to change the display mode to full screen (or press F12 on the keyboard). When you want to resume normal mode, you should Single-Right- Click image area and select ―Restore display‖. 2. Instant playback Single-Right-Click desired camera window and select ―Instant playback‖.
DVR Server Manual ver.5.05/rel.092507 4. OSD Adjustment Single-Right-Click video image area in main interface and select ―OSD Adjustment‖ to adjust the position of OSD (IP Camera does not have this function; you can set the OSD position in IP Camera setup remotely). OSD includes time and channel name. In this screen you can press time or channel name and drag them to where you want directly, after that, you can press button to save and press button to resume time and channel name to default position. 5.
DVR Server Manual ver.5.05/rel.092507 DVR system will pop up information to inform you of the failure of recording and the corresponding camera will stop recording. 1.2.3 Interface description 1. Partition mode button to set the window‘s partition mode of the main screen. There are many types of partitions. The available partition is determined by the total channels of the card.
DVR Server Manual ver.5.05/rel.092507 record disk and description of selected camera. 7. Local setup submenu Press button to enter Local setup submenu. 8. Local playback submenu Press button to enter Local playback submenu to search local video/audio data. button to prevent unauthorized user to operate system. Press this button 9. System lock Press again; the unlock dialog box will be displayed. Input your User ID and password then press OK to unlock it.
DVR Server Manual ver.5.05/rel.092507 11. Exit program Press button to exit program. After clicking this button, a dialog will display. Click ―OK‖ to quit DVR system. 1.2.4 System Menu opens up your option to go to other features menu such as remote voice chat, Windows Explorer, electronic map, write working log, view system log and motion setup as shown below: 1.2.4.1 IP Camera Device List Press this bar to add an IP Module to the DVR system.
DVR Server Manual ver.5.05/rel.092507 1.2.4.1.1 Add IP camera device Press button to add an IP Camera device: Figure2— 1 【Server Name】Set a name for the new IP camera device. 【IP Address】Input the address of the IP Camera, it is an IP address or IP alias of an IP camera which is connected through DNS Server. 【Connect Port】Set the port through which connects to IP Camera.
DVR Server Manual ver.5.05/rel.092507 1.2.4.1.4 Decode card work mode DVR system supports playing video of IP Camera to TV wall directly, then it uses the hard decoding function of decoder, so you should set the work mode of decoder. If you don‘t use hard decoding, you can‘t output video of IP Camera real-time, user can only play back recording data to TV monitor by selecting Playback to TV Wall function. Note: Each NV4002MD card can decode 2 channels D1 or 4channels CIF.
DVR Server Manual ver.5.05/rel.092507 9. Open Explorer When keyboard is locked, Users can operate window resource via explorer. 10. Open electronic map Select this function to set E-map, Click icon and then Right-Single-Click on the map, the setting picture will appear. You can add or delete sensors and cameras that are pointed by the arrow or change the digital map.
DVR Server Manual ver.5.05/rel.092507 12. Play back to TV monitor In DVR system, the recording data can be transmitted to TV monitor via Matrix card. When system runs the ―Playback to TV Wall‖ process, the Matrix card will output recording data. If this process does not run, matrix decode card will output real-time video according to your matrix board setup.
DVR Server Manual ver.5.05/rel.092507 1. Add mask/Delete mask Press button to set the area to be covered with a black mask. If there are some areas that you don‘t want to show, you can draw those areas with the mouse until they change to black. You can set several cover areas. Press this button again when finish adding. This must not be used as masking for motion detection.
DVR Server Manual ver.5.05/rel.092507 15. Keyboard shortcuts setup You can select from this setup which of the keyboard shortcuts you do want to enable or disable. These shortcuts allow you to use function keys on your keyboard to run a command such as zooming on a camera, run an auto tracking cameras etc… 1.2.5 Network panel This panel displays the network configuration of DVR system.
DVR Server Manual ver.5.05/rel.092507 1.2.6 PTZ Control panel In DVR system, there are three ways to operate the PTZ; a. Panel operate; b. Operate in video area directly ; c. Keyboard operate 1.2.6.1 Relay (On/Off) Control the PTZ cameras internal relay (relay1) or the decoder‘s relay (relay 1). Used to turn on a light or control an access gate. 1.2.6.2 Wiper (On/Off) If using the PTZ cameras corresponding wiper control relay, this toggles the relay/wiper on and off. 1.2.6.
DVR Server Manual ver.5.05/rel.092507 1.2.6.6 Auto tracking (On/Off) Press button to use the PTZ camera tracking the floating object automatically. 1.2.6.7 Speed Dome Press button to operate the speed dome, including Preset Setup, Preset Call and Preset Tour: 1.2.6.7.4 Preset Setup In this screen you can set the preset position: PTZ speed setup Press and drag the slider bar to adjust the speed of PTZ.
DVR Server Manual ver.5.05/rel.092507 Add/Delete preset In this section you can set the preset name with its sequence number, then you can press / button to add/delete a preset. When you want to modify the preset you can press button to confirm your modification. For different cameras, they have different commands to open and set, so you can choose the call mode in the drop-list for different cameras. Home position You can set a home position for the PTZ.
DVR Server Manual ver.5.05/rel.092507 1.2.7 Color and Audio adjustment ↑Increase ↓Decrease ① ② ③ ④ ⑤ ①Press the first button and drag to adjust the brightness of the image that you selected. You can reset its default value by pressing . ②Press the second button and drag it to adjust the contrast of the image that you selected. You can reset its default value by pressing . ③Press the third button and drag it to adjust the hue of the image that you selected. You can reset its default value by pressing .
DVR Server Manual ver.5.05/rel.092507 1.2.9 DI/DO Control 1.2.9.1 DI control Press number button to forced a sensor to activate or deactivate and overide the current settings in sensor setup. The channel of DI and DO is determined by the setup of DI/DO device you set in System setup. The status of DI has three types: Input channel 1 is deactivated. Input channel 1 is activated. Input channel 2 has an alarm. When there is no alarm, user can press number button to enable sensor forcibly.
DVR Server Manual ver.5.05/rel.092507 Chapter 2 Local setup The DVR System Configuration Menu include 7 groups of configuration setup: System setup Camera setup Sensor setup PTZ & linkage setup Email setup Matrix & display setup User setup Refer to the Tutorial video for other selected details about this topic. The tutorials are small video file that can be played from the local DVR system. It will illustrate many of the common task involved in working with your DVR system.
DVR Server Manual ver.5.05/rel.092507 2.1 System setup 2.1.1 System setup 【Camera Channel】Displays the number of total channel on the DVR system. This information is non-changeable and it is based on the DVR card installed on the system. For IP Camera, you should set it separately at IP Camera setup. 【Sensor Input】 Display number of sensors (DI). 【Sensor output】Display the number of alarms(DO). 【Audio Monitor】Select real-time monitoring audio. 【Use E-Map】Select use Electronic Map or not.
DVR Server Manual ver.5.05/rel.092507 【Record Begin Disk】Select the first disk from which the DVR system saves data. The prior disks before the selected drive will not be used to store video files and it will not be checked by the system. When the capacity of HDD is not enough or there are some mistakes while recording, system will inform the failure of recording and the corresponding camera will stop recording.
DVR Server Manual ver.5.05/rel.092507 So please ensure that your client’s program is in use, Port 5300 is listening and the network is in good condition. If not so, the system will not be stable. 【Alarm Send Port】This is the alarm message connecting port, which is used to send alarm from DVR Server to Client. 【Web Server Port】The IE client connecting port. Default value is 80 for http access; but for some windows XP editions, it shields 80 port.
DVR Server Manual ver.5.05/rel.092507 3. NVR Clients get IP of DVR through DNS server according to its domain. 4. NVR Clients visit DVR through the IP that it obtains from the DNS server. 【Interval Connection Time】Set the interval time to connect DNS automatically. 【Permit Max Connect Video Num】The maximum number of client connections that the DVR will allow. The number of connections will depend on the network bandwidth. The maximum remote client connections are 256.
DVR Server Manual ver.5.05/rel.092507 2.2 Camera setup 2.2.1 Camera setup 【Selected Camera】Select from the drop-down list a camera number you would like to configure. Any setting changes on the selected camera will only affect the camera number selected, unless explicitly specified at the option called ‗Copy to Setup to: All cameras‖ (which will be discussed later on this chapter). IP Cameras are not included. For IP Camera, you should set it separately in IP Camera setup.
DVR Server Manual ver.5.05/rel.092507 the frame rate should be from 1 to 30 fps. While image size is set ―704*576‖, the frame rate should be set around 1 to 15 frame.(only for HC Series) 【Remote Image size】Select image resolution to be transmitted to clients. When you set the 【Image Size】as 4CIF(704*576), this configuration is not available, the program will select it as CIF automatically because the DVR board does not support dual stream when it records with 4CIF resolution.
DVR Server Manual ver.5.05/rel.092507 【Image Size】Set the resolution for local record. There is an item ―704*576‖, each channel can be set ―704*576‖, but not real time, system will select frame rate automatically around to 12-15fps(only for HC Series)。To get the best effect, you should set the resolution of local record according to your CPU configuration.
DVR Server Manual ver.5.05/rel.092507 【OSD Contrast】Set OSD displaying brightness & position. An ―auto‖ item in the OSD Contrast‘s drop-down list will make OSD suit the background‘s color automatically. 【Copy Setup to】Set other cameras with the same setup. Notes: 1. If less than 64 cameras are used,disable all unused or inactive camera channels. 2. The unit of the swap file should be MB. The range is 2 to 50. 3. Set the position and contrast of the date shown on the screen.
DVR Server Manual ver.5.05/rel.092507 Recording Schedule Setup (setting for cameras of local board cards and IP Modules.) Tips: One block of pane means half an hour. First, click record mode icon , then click schedule diagram, hold down the mouse and move it to select the corresponding area to record. (Drag & Drop). 1. Normal Record (Green): DVR System is always recording video. (e.g. Sun. Fri. Sat.) 2. Motion Detect (Blue): DVR System begins to record video only when it detects moving objects. (e.g.
DVR Server Manual ver.5.05/rel.092507 2.3 Sensor setup 2.3.1 Sensor setup 【Select Sensor】Select the sensor from the drop-down list in order to set the parameters for it. 【Sensor】 Select this sensor port to use or not. 【Sensor Position】Enter the description of your sensor location for easy identification. 【Speed Dome Preset】 Select linkage of Speed Dome preset number . Speed Dome will move to this preset number automatically when there is an alarm. (Speed Dome installation needed).
DVR Server Manual ver.5.05/rel.092507 【Alarm Action】Select system alarm linkage mode when an alarm stops. ―Stop Immediately‖ means the system will stop the alarm immediately after the alarm driver stops an alarm. ―Do Not Stop‖ means the system will not stop the alarm after the alarm driver stops an alarm. ―Wait‖ means the system will stop the alarm at your setting time after the alarm driver stops an alarm. 【Sensor input】Add sensor to selected group.
DVR Server Manual ver.5.05/rel.092507 2.4 PTZ & Linkage setup 2.4.1 PTZ protocol setup 【Selected Camera】Select the camera from the drop-down list to set the parameters. The cameras just include the cameras of local board card; IP Cameras are not included. For IP Camera, you should set it remotely in IP Camera setup. 【PTZ Port】Select PTZ connecting port, when you do not use PTZ port, please choose ―------‖. 【PTZ Protocol】Selects the PTZ protocol for the PTZ camera.
DVR Server Manual ver.5.05/rel.092507 2.4.2 Motion detection relay & remote client alert 【DO Port】 & 【DO Description】Select a DO port and set its name to identify the various DO port. It will be shown as a tip when the mouse moves closely or above the DO button in DVR Server or NVR Client. 【Select Camera】Selects camera to be set from drop-down list. 【Alarm Send To Network】Select sending alarm to network clients or not. 【Motion Alarm Play Sound 】 Press button to selects a ―.
DVR Server Manual ver.5.05/rel.092507 2.5 E-mail setup Note: Before you configure the E-mail setup, you should pay attention to several points as mentioned below: The alarm to trigger E-mail sending includes two types: Camera-related alarms (Motion detection alarm & Video loss alarm) and Sensor-related alarms. For Camera-related alarms, you should set Motion detection area & Cover setup and to check alarm in Motion detection relay & remote client alert.
DVR Server Manual ver.5.05/rel.092507 2.5.2 E-Mail setup 【Send To】Set E-mail address of recipient (where E-mail is to be sent). 【Copy To】Set additional Email address of recipient to whom system sends E-mail. 【User Email】 Enter email address of sender. 【Email Title】Enter title of the E-Mail to be sent. 【Grab Picture As Attachment】When there is an alarm, the system will grab picture, operator can select whether to send the picture as an attachment of the E-mail.
DVR Server Manual ver.5.05/rel.092507 【Video Split Mode】Select video output display mode, there are 1split , 2split , 4split , 9split , 13split and 16 split . 【Video Window】 & 【Display Camera in the window】After selecting video split mode, there will be a corresponding display video window. Select one camera or several cameras to show in the window. The Video cameras allowed to be used can be any cameras from the local board card and IP Cameras.
DVR Server Manual ver.5.05/rel.092507 2.7 User setup 2.7.1 User information 【Local Password】 Check to enable User Manage mode for local PC DVR, and activate the lock button in main window. Only authorized users can log into Optiview System at User Manage Mode. 【Auto lock time】Select a time to enable system to lock automatically when there are no activity such as a user doing a playback or changing configurations of the software. 【Network Password】 Check to enable User Manage mode for Client.
DVR Server Manual ver.5.05/rel.092507 【Add User】Up to15 users can be added to system except Admin. Click icon to add new user you edited to user list. 【Modify User】 Select a user from user list, then click button to modify it. 【Delete User】 Select a user from user list, then click button to delete it. 2.7.2 User right setup 【Select setup items】Select an item from the drop-list and then choose the cameras for the users.
DVR Server Manual ver.5.05/rel.092507 Chapter 3 IP Camera Setup Note: for IP camera setup, its alarm and related setup will only be available when you set it remotely; the Local setup of PC DVR is not available for IP Cameras except Recording Schedule in Camera Setup Functional buttons There are 5 buttons in each page located at the bottom. They are Upgrade, Restart, Time adjustment, Save and Exit. The system can upgrade to the server remote. Click this button, and select the right file.
DVR Server Manual ver.5.05/rel.092507 3.1 Server setup Press button to set server parameters remotely: In the server window, some blanks‘ background are gray. Those parameters are read from foreside server, you can‘t modify them. Other blanks whose background is white, can be set remotely. 【Server Name】Enter the name description for easy identification. This name delegates the foreside server. If use DNS to get IP, this name will be used.
DVR Server Manual ver.5.05/rel.092507 【DNS Server IP】If use DNS, input the DNS host IP address. 【Remote manage】 【Remote manage IP】 【Remote manage port】 Set the IP address and port of host server who will receive the message upload from foreside server 3.2 Channel setup Press button to set channel parameters.
DVR Server Manual ver.5.05/rel.092507 【Frame Rate】Select the record rate of camera from drop-list. 【Resolution】Set the resolution at which the video files will be recorded. Choices are DCIF, CIF, QCIF, 2CIF and 4CIF. The higher the resolution, the more disk space will be used. 【Stream Type】Select video and audio or only video record. 【Image】Set the quality of the image to be recorded. Select from worst, worse, normal, good and best.
DVR Server Manual ver.5.05/rel.092507 【PTZ Address】Set the address of the PTZ camera, which must be matched with the value of dip switch in the PTZ. 【Preset position & schedule setup】Define preset position and set time to call preset position automatically. System can add and delete plan time. 【Copy to】After finishing one channel, if you want to set any other channels‘ configuration the same as this camera, you can select the channel number from drop-list, and press 3.
DVR Server Manual ver.5.05/rel.092507 【Sensor NO】Select one sensor to be set. 【Sensor Name】Enter the name description of the sensor. 【Type】Select alarm type (sensor type) from ―NO‖(Normally Open) or ―NC‖(Normally Close). 【Policy】Selecting ―Sensor Alarm Handling‖ firstly, handling policies will be available as follows: Audible warning—Indicates the alarm with voice. Upload to DVR Server—Update the alarm information to DVR system. Trigger alarm out—Trigger alarm box to output the alarm.
DVR Server Manual ver.5.05/rel.092507 3.5 Alarm setup Press button to set alarm parameters. 【Camera】Select a camera to be set from the drop-list and you can copy the configuration to the other cameras by clicking copy button. 【Alarm Type】Select alarm type: Motion detect, Tempering alarm and Video Loss. 【Level】Select sensitivity levels from 0 (the lowest level) to 5 (the highest level) for the alarm. 【Set motion detection areas】Left-click mouse and drag it on the screen to select motion detect area.
DVR Server Manual ver.5.05/rel.092507 【Copy to】After finishing one channel, if you want to set any other channels‘ configuration as the same as this camera, you can select the channel number from drop-list, and press button.
DVR Server Manual ver.5.05/rel.092507 Chapter 4 Local playback Main interface Click button in the main interface to enter the local playback interface. 4.1 Select playback channel Directly click the number button in the top right screen corner. The DVR system will play back recorded data from the beginning of today. Blue channel number means that channel has recorded data. Click channel number to select search camera. Tips: Right click the picture to perform digital zoom function.
DVR Server Manual ver.5.05/rel.092507 Refer to the Tutorial video for other details about this topic. The tutorial video can be played from the local DVR system. Please follow the link from the desktop ―Click here for Technical Support and Serial number‖. 4.2 Play file and related operations Press this button to set partition mode of Window, there are 1，4，9and 16 splits.
DVR Server Manual ver.5.05/rel.092507 4.2.1 Press this button to open all playback windows in sequence according to the order of the cameras. 4.2.3 4.2.4 Press this button to close all playback windows. / Previous / Next frame: press these two buttons to look at the previous or next frame. 4.2.5 Reverse play: press this button continuously to play video reversely, the speed is determined by the following playing speed adjustment bar. 4.2.
DVR Server Manual ver.5.05/rel.092507 4.3 Capture picture Click capture button to capture a still picture. When one is captured, a dialog box will appear to select a file name. After your confirmation, you will be asked to input the save path. *Note: the size of the image is that of the playing window. 4.4 Create clip file Click button 4.4.1 ，there are three items to be selected as below. Create file clip Press to create file clip.
DVR Server Manual ver.5.05/rel.092507 【Play control button】User can press and drag slider on to control the player time. 【Beginning and stop position setup】After you select a time, press button to set it as the beginning time, and then drag the bar to select another time and press button to set it as the end time. When you are finished, the file attribute on the left will show the size of the file to be created.
DVR Server Manual ver.5.05/rel.092507 【Save Path】Select path for the backup file, User can backup record file to CD using CD-RW disc. 【Backup Camera】Select the backup camera. User can select more than one camera at one time. 【Select begin time】【Select end time】Select the beginning time and end time of the file to backup. 【Unite File】Select unite file enable or disable. If you select enable, all record files of one camera will be united to one file.
DVR Server Manual ver.5.05/rel.092507 4.4.3 View Backup file a.【Select channel】 Select camera channel you want to view. b.【Save Path】Select path of the backup file. This is the drive where you saved your video backup file on the local PC. c. Select one file from File List and Double-Click it, this file will be played. The united file is named by ―date + begin time‖ and ―date + end time‖. d. Capture a picture. e.
DVR Server Manual ver.5.05/rel.092507 ① ④ ② ③ Area ①:File directory. Area ②:File list. Area ③:The File directory and list of will be burned to CD. Icon ④: Create a new directory in area ③. :Add all the file from area ②to area ③. :Add selected file from area ②to area ③. :Delete selected file from area ③. 【Burn CD drive】 Select CD-ROM driver. 【Volume label】 Set the CD‘s label. 【Total file size】Show the size of all files will be burned to CD.
DVR Server Manual ver.5.05/rel.092507 Refer to the Tutorial video for other details about this topic. The tutorial video can be played from the local DVR system. Please follow the link from the desktop ―Click here for Technical Support and Serial number‖. 4.
DVR Server Manual ver.5.05/rel.092507 Functional buttons for picture editing. Sets the adjustments back to the default setting. Print picture, if the image is wider than 400 pixels, it will be printed smaller. When it‘s bright, with the mouse moving, part of the picture will be enlarged. Delete current file or delete all files. 4.6 Fast search Click button to show the date: The green date is the current date. The gray dates indicate no data.
DVR Server Manual ver.5.05/rel.092507 4.7.1.2 Smart search 4.7.1.2.1 Function introduction: This function allows users to draw a zone on a video image and do a search for any motions, missing objects, or unattended object events that occurred in that zone. It can help you find recorded video you are interested. Notice: Smart Search accuracy is decided by sensitivity value in Motion Setup 4.7.1.2.
DVR Server Manual ver.5.05/rel.092507 Note: 1. If you press synchronic button while smart search is running, system will end smart search. 2. The sensitivity of the smart search is the same as in the motion detection. If you set a high sensitivity, system will perform a search even though there is no motion in the specified area. In contrast, if you set a low sensitivity, it is possible that the system will not search when there is some small range of motion in specified area.
DVR Server Manual ver.5.05/rel.092507 Image zoom out. Press this button, single click the left mouse button on an image; a quarter of the image will be enlarged. Single click right mouse button on the image and it will return to its normal size. This slider adjusts the voice level. This slider adjusts the playing speed; click the button to resume normal playing speed. *Note: 1.
DVR Server Manual ver.5.05/rel.092507 Chapter 5 Internet Explorer - Client Access The client user can view video of the DVR Server through Internet Explorer, The default web server port is 80; if the user changes its to another port number, the user should add this port number after domain name when viewing the video of Server through Internet Explorer. E.g.: http://192.168.0.119:1280. 5.1 Functions of IE Client 1. Video display and video storage; 2. Audio input; 3.
DVR Server Manual ver.5.05/rel.092507 First, select the number of display partition from the main screen: . Note that each partition represent the number of camera you will be connected into the DVR server. Maximum connection is 16 cameras. It is limited due to the fact that your local PC‘s CPU will be processing all these live video streams and could slow down your local PC performance.
DVR Server Manual ver.5.05/rel.092507 5.3 Local search Press button to enter local search: Display setup and data information Playing operation area 5.3.1.1 Display setup and data information In this area, you can select display partition mode, date, video channel and its video file named according to time. 5.3.1.
DVR Server Manual ver.5.05/rel.092507 【Playing-control buttons】 【Single frame play】 【Playing speed control】 : Play, Pause, Stop. : Previous frame, next frame Slowly play Fast play 5.4 Remote search Most functions and operations of Remote search are same as Local playback; the difference feature is that remote search has an added download feature When you playback remotely, you click button, system will save video of current channel you selected on your local hard drive.
DVR Server Manual ver.5.05/rel.092507 NOTE: When using IE client to view the DVR server and you connect successfully, a four partition blue window will appear. If you are unable to connect, the possible reasons are: ①. The Web server port has been used by other programs. ②. Your computer didn‘t download the player plug normally. The reason may be the jurisdiction of your computer is too high, or your computer has plug filter.
DVR Server Manual ver.5.05/rel.092507 Chapter 6 Mobile Client 5.5 Recommended Mobile Telephone Requirements ①Before you run Mobile Client, please check if your mobile phone supports JAVA and comply with following applicable standards: CLDC version: CLDC-1.0 MIDP version: MIDP-2.0 ②Your mobile telephone should have GPRS or CDMA to transport data. ③Set Internet as the access point of your phone call. ④Select ―Enable‖ to allow the PDA to connect to DVR server in the network setup of the DVR system.
DVR Server Manual ver.5.05/rel.092507 5.6 Download software Here are following methods to download our mobile client software: 1) Download through wireless technology (in Wireless LAN) such as Blue tooth, infrared. 2) Copy mobile client software to phone directly through data cable.
DVR Server Manual ver.5.05/rel.092507 【User】/【Pass】Fill the valid user with its password to visit server from MobileDvr. And the server has enabled rights management, login user ID and password from client will be checked. If the user has no rights to visit that camera, the connection will be cut down automatically. Press ‖Login‖ button to connect the DVR server. 5.9 Camera List The MobileDvr will enter the Camera List after you connect the DVR server successfully.
DVR Server Manual ver.5.05/rel.092507 5.10 PTZ control Press the ―Options‖ button and select the ―PTZ‖ button to enter the PTZ control interface. 【Orientation control】: Select the button and press ―OK‖,it will change into . After that, by pressing and holding the up, down, right and left buttons, the PTZ camera will move up, down, right and left. Note: Please try ―5‖button on your phone if pressing ―OK‖ does not work.. 【Zoom + / Zoom –】 ： Control the zoom function of the PTZ camera.
DVR Server Manual ver.5.05/rel.092507 Chapter 7 Appendixes 7.1 Appendix A: Fast key reference Please refer to shortcuts keyboard setup This color key denotes PTZ control. This color key is other function control.
DVR Server Manual ver.5.05/rel.
DVR Server Manual ver.5.05/rel.092507 7.3 Appendix C: Update drivers of DVR card If you first install the card or upgrade the DVR software, you should install or update the card driver. The steps are as follows: 1) Find the driver folder, and run ―driver Install‖ program. 2) A dialog will show on the screen. 3) Click ―Install or Update Driver‖ button, a prompt UI will inquire you, click ―yes‖, the program will continue the installation.
DVR Server Manual ver.5.05/rel.092507 4) If the driver installed successfully, the program will show you a prompt, click OK, the install driver program finished. 7.4 Appendix D: How to use “Copy File” folder. In installation CD, there is a file named ―CopyFile‖ If you want to replace some files in installation directory, you can copy new files into ―CopyFile‖, when you finished the installation, the new files will replaced the old files.
DVR Server Manual ver.5.05/rel.092507 Thus, when you finished the installation, the all files which in ―CopyFile‖ will replace the old files. Note: If you replace the image, the new image‘s size and name should be same with old image. 7.5 Appendix F: Frequent Asked Questions 1) IE client does not find the server. Possible reasons: The Web Server port was shielded or has been used by other program.
DVR Server Manual ver.5.05/rel.092507 7.6 Requirements to View a DVR remotely via Internet On a local network, you should be able to readily access your DVR system remotely via web browser or the remote client software by using the local IP address of the DVR system. Note: This information is provided as a courtesy only. Optiview Inc. does not provide technical support for routers, similar network devices and/ or problems in configuring your local area network.
DVR Server Manual ver.5.05/rel.
DVR Server Manual ver.5.05/rel.092507 7.7 How to turn on automatic logon in Windows XP View products that this article applies to. Article ID : 315231 Last Review : June 23, 2005 Revision : 4.2 This article was previously published under Q315231 Important This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs.
DVR Server Manual ver.5.05/rel.092507 b. Type DefaultPassword as the value name, and then press ENTER. c. Double-click the newly created key, and then type your password in the Value Data box. If no DefaultPassword string is specified, Windows XP automatically changes the value of the AutoAdminLogon registry key from 1 (true) to 0 (false) to turn off the AutoAdminLogon feature. Double-click the AutoAdminLogon entry, type 1 in the Value Data box, and then click OK.
DVR Server Manual ver.5.05/rel.092507 7.8 VR Enterprise Series: DVR System Recovery Procedure 1. Reboot the PC by turning off the PC and turning it back ON. 2. When it begins to boot up (Black screen), press DEL key on the keyboard. It should bring you up on the blue screen with top heading saying: CMOS Setup Utility. 3. Press arrow down on the keyboard till it is highlighting the Advanced BIOS Features then press Enter key on the keyboard. 4. Press arrow down until it points to First Boot Device: 5.
