Owner's manual

DVR Server Manual ver.5.05/rel.092507

the frame rate should be from 1 to 30 fps. While image size is set ―704*576‖, the frame rate should

be set around 1 to 15 frame.(only for HC Series)

【Remote Image size】Select image resolution to be transmitted to clients. When you set the

【Image Size】as 4CIF(704*576), this configuration is not available, the program will select it as CIF

automatically because the DVR board does not support dual stream when it records with 4CIF

resolution. (only for HC Series)

【Image Quality】Sets the quality of the image to be recorded. Select from Poorest, Poor,

Medium, Very good and Best.

Click this button to make advanced setup for video quality, you can set I P B frame and

maximum bit rate.

(Note: If you don‘t familiar with those features, we advise you NOT to revise them)

Recommend setup:

For CIF:

Image

quality

I frame

value

P frame

value

B frame

value

Max bps

Best

900000

Good

750000

Medium

600000

Low

450000

Lowest

300000

For DCIF:

Max bps = (Maxbps/3)*5 Note: Maxbps is the CIF‘s value with the same configuration(IPB)

For D1:

Maxbps = (Maxbps/3)*8 Note: Maxbps is the CIF‘s value with the same configuration(IPB)

【Alarm Adjust fps】Select enable or disable, If you select ‖enable‖, and an alarm occurs, the

camera will record with real-time frame rate (25fps or 30fps) ,even though 【Frame Rate(fps)】 has

been set other values(eg:5fps).

【Remote Quality】Set the image quality of the clients to be recorded from Poorest, Poor,

Medium, Very good and Best.

Click this button to enable users to make advanced setup for video quality of client end,

also can setup I P B frame and adjust maximum bit rate according to the network bandwidth.