Owner's manual

DVR Server Manual ver.5.05/rel.092507

2.5.2 E-Mail setup

【Send To】Set E-mail address of recipient (where E-mail is to be sent).

【Copy To】Set additional Email address of recipient to whom system sends E-mail.

【User Email】 Enter email address of sender.

【Email Title】Enter title of the E-Mail to be sent.

【Grab Picture As Attachment】When there is an alarm, the system will grab picture, operator

can select whether to send the picture as an attachment of the E-mail.

【Alarm Send Email Cameras(Screenshot From Alarm Camera)】Operator can select the

cameras, which will trigger to send E-mail when they have alarms. The cameras you can select are

only the cameras of the local board card, IP Cameras are not included.

【Alarm Send Email Sensors(Screenshot From Linked Camera)】Operator can select the

sensor, which will trigger to send an E-mail when they have alarms.

*NOTE: If you select to send the grab picture as the attachment, you should check the alarm of the

camera or the sensor, and set ―alarm send to network‖ to be enabled.

2.6 Digital matrix setup

2.6.1 Matrix setup

【Matrix Group】System operator can set groups of video images to be sent out through the

matrix decode card. Each group has a different display mode. You can set up to 16 groups.

【Video Out Port】Select the output port of the Matrix card that you want to set, the total

number of channels is decided by Matrix Decoder card.

【Video Out Standard】Set Matrix video out to standard, you can select from PAL and NTSC.