Auto Zooming Tracking Dome Cameras User Manual
Auto Zooming Tracking Dome Camera User Manual Contents Section1 Instruction ..................................................................... 3 1.1 Production Introducing ................................................... 3 1.2 Character ....................................................................... 3 1.3 Function Description ...................................................... 4 1.4 Specification Comparison Chart .................................... 9 Section 2 Normal Operation ..........
Auto Zooming Tracking Dome Camera User Manual 3.6.4 Password Setting ............................................... 41 3.6.5 Windows Blanking ............................................. 43 3.6.6 Set Windows ...................................................... 44 3.6.7 Edit Windows Location ...................................... 45 3.6.8 Edit Windows Zoom ........................................... 46 3.6.9 Heater Setting .................................................... 47 3.6.10 Cruise Setting ....
Auto Zooming Tracking Dome Camera User Manual Section1 Instruction 1.1 Production Introducing The dome cameras feature high position resolution, high speed, low price and selectable communication protocols; Widely used in surveillance system. 1.2 Character Built-in English OSD Menu, by which you can change dome parameter, set or call preset, and achieve auto tour, pattern, auto scan etc. The feature will define the activity when the dome parks. Integrated design making it high reliability.
Auto Zooming Tracking Dome Camera User Manual The features password protection to prevent unauthorized changes to the dome setting. A set window can be reversed so that it is the only visible tilt area of the scene. ll other parts of the tilt area of the scene will be blanked. Revolutionary motion tracking technology make it realize intelligent surveillance easily with the help of alarming function 1.
Auto Zooming Tracking Dome Camera User Manual is a large amount of zoom. (4) Auto Flip When the dome camera tilts downward and goes just beyond the vertical, the dome camera rotates 180 degrees automatically. Afterwards, the dome camera starts moving upward even you still hold joystick in the down position. Once you let go of the joystick after the dome rotates, joystick control returns to normal operation. The auto-flip feature is useful for following a person who passes directly beneath the dome.
Auto Zooming Tracking Dome Camera User Manual Focus can be manually controlled via keyboard or matrix, please refer to control keyboard or matrix operation manual for detailed operation. When on manual focus status, operations such as adjusting positions or preset setting will resume the camera to auto focus status. The camera will not auto focus in the following status. Target is not in the center of image. Targets are in near and far at the same time. Target is of strong light object.
Auto Zooming Tracking Dome Camera User Manual Camera can automatically adjust white balance according to the alteration of background lightness to give a true color image. (9) Backlight Compensation (BLC) If a bright backlight presents, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source outside this area, it will change to white.
Auto Zooming Tracking Dome Camera User Manual Make the dome random scan 360º range in the current position. (15) Frame Scan This feature freezes the scene on the monitor when going to a preset. This allows for smooth transition from one preset scene to another. (16) Zones Setting A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The spectra dome system is capable of eight zones, each with a 6-character label.
Auto Zooming Tracking Dome Camera User Manual A set window can be reversed so that it is the only visible tilt area of the scene. All other parts of the tilt area of the scene will be blanked. NOTE: Be the same with only the model of TRKPTZ-18NX, TRKPTZ -26NX, TRKPTZ -18NX, TRKPTZ-26NX. (20) Auto tracking Revolutionary motion tracking technology making it realize intelligent surveillance easily with the help of alarming function 1.
Auto Zooming Tracking Dome Camera User Manual Model TRKPTZ- TRKPTZ- TRKPTZ- TRKP TRKPTZ- TRKPTZ- 1801 1802 1803 TZ-22 22X 23X 00PT Signal Format PAL/NTSC Image Sensor ¼ inch color CCD Horizontal Resolution 480 TVL Video Out 1.0±0.2VP-P P/T Speed Pan:0.05º~240º/sec;Tilt:0.03º~160º/sec S/N Ratio ≥50DB Sensitivity IR cut Filter 1Lux 0.1Lux No 0.01Lux 1Lux Yes 0.1Lux No AGC Auto/Manual BLC Auto/Manual 0.01Lux Yes F1.4-F3.0 f=4.1-73.8mm F1.6-F3.8 F1.6-F3.7 / F1.6-F3.
Auto Zooming Tracking Dome Camera User Manual Optical Zoom 18X Digital Zoom 12X 22X 23X 8X Panning Pan: 360ºContinuous;Tilt:-5º~ 92º Range Preset 256 Number Auto Cruise Auto switch from 1 to 30 preset position sequentially Patterns 4 Zone 8 Alarm input 4 Alarm output 2 Windows 8 blanking Interface Baud Rate RS-485 1200bps , 2400bps, 4800bps, 9600bps , 19200bps Address 0~255 Input voltage 24VAC Input power 20W(Without Heater)/50W(With Heater) Operating -25℃~ 70℃( Without Heater ) /
Auto Zooming Tracking Dome Camera User Manual Section 2 Normal Operation These operating instructions cover the basic operation of the dome and its features. When the dome is used with other manufacturers‟ control system, please refer to the system controller‟s instructions. In the event of special requirements outside the scope of this document it is prefer to contact your local distributor. Below instructions are based on using control keyboard as controlling device.
Auto Zooming Tracking Dome Camera User Manual dome will calls these parameters saved in memoriy and adjust Pan/Tilt/Zoom of the camera to that position. Presets 1 Function Presets 2 80 Auto tracking 37 82 Auto switch sequentially among preset positions 19 83 Clear all presets positions 20 95 Select main programming menu 28 97 Random scanning 30 98 Frame scanning 31 99 Start auto scanning 32 Extended Presets Note: For others dynamics controllers with only 64 or 40 presets.
Auto Zooming Tracking Dome Camera User Manual manual. Please refer to the installation packet supplied with the back box for installation instructions. After installed properly, power up the camera. It will start a configuration sequence. After the configuration is done, the monitor will display as below. PTOL:PELCO-D COMM:2400,N,8,1 ADDR:0 This information will remain on the monitor until dome operation begins. Please refer to the following pages for more about how to operate and program the camera.
Auto Zooming Tracking Dome Camera User Manual 3.1 Main Menu Set 95# preset to access main menu. MAIN MENU < SYSTEM INFORMATION > < DISPLAY SETUP > < DOME SETTINGS 1> < DOME SETTINGS 2> RESET CAMERA REBOOT SYSTEM LANGUAGE ENGLISH EXIT Figure 3.1 MAIN MENU Access other OSD menus: (1) Move the joystick up or down to position the cursor beside others OSD menus. (2) Press iris Open to confirm selection. 3.2 Select Language The language for the on-screen menus is selectable.
Auto Zooming Tracking Dome Camera User Manual (3) Move the joystick up or down to view selections. Press iris Open to confirm selection. All on-screen menus are changed into the selected language. 3.3 System Information Move joystick to select , press Open to confirm the system information menu shown as Fig 3.2. SYSTEM INFORMATION 9600,N,8,1 ADDRESS 255 PROTOCOL PELCO-P PRESETS NUMBER 256 LANGUAGE ENGLISH TEMPERATURE 36°C BACK EXIT COMM Figure 3.
Auto Zooming Tracking Dome Camera User Manual (2) Press iris Open. 3.4 Display Setup 3.4.1 Display Setup Move joystick to select , press Open to enter the display setup menu shown as Fig3.3. DISPLAY SETUP PRESET LABEL ON ZONE LABEL ON ZOOM ON AZIMUTH/ELEVATION ON CAMERA LABEL ON
Auto Zooming Tracking Dome Camera User Manual ratio label is displayed when zoom is activated. Azimuth/elevation and direction labels are displayed when pan/tilt is activated. The dome label is displayed when the dome label is activated. The following settings are available foe each label: OFF: The label is not displayed when activated. ON: The label shows when activated. 3.4.2 Label Position Labels can be placed anywhere on the monitor.
Auto Zooming Tracking Dome Camera User Manual 3.5 Dome Settings 1 3.5.1 Dome Settings 1 Move joystick to select , press Open to enter the dome setting1 menu shown as Fig3.5. DOME SETTINGS1 PRESET NUMBER 256 BACK EXIT Figure 3.5 Dome settings 1 3.5.2 Camera Settings Move joystick to select , press Open to enter the camera menu shown as Fig3.6.
Auto Zooming Tracking Dome Camera User Manual CAMERA ZOME LIMIT X46 BACKLIGHT COMP ON/OFF BACK EXIT Figure 3.6 CAMERA ZOOM LIMIT: Zoom limit enables you to define a limitation on zooming times. BACKLIGHT COMPENSATION (BLC): If a bright backlight presents, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris.
Auto Zooming Tracking Dome Camera User Manual PROGRAM AE CORTROL AE MODE AUTO LOW LIGHT MODE AUTO LOW LIGHT LIMIT 1/50 IRIS LEVEL F2.0 AGC LEVEL 0dB BIRGHT LEVEL 0dB/F2.0 BACK EXIT Figure 3.7A PROGRAM AE CORTROL PROGRAM AE COORTROL PROGRAM AE MODE AUTO IR CUT FILTER INISERT/REMOVE BACK EXIT Figure 3.7 B PROGRAM AE CORTROL Note: Figure 1.7A shows program AE mode, it is only for models names TRKPTZ18XX and TRKPTZ26XX. Figure 1.
Auto Zooming Tracking Dome Camera User Manual LOW LIGHT LIMIT Low light limit is the maximum duration, it is in fractions of a second, that electronic shutter will remain open in low light conditions. The default setting is 1/50. Settings include:1/2, 1/3, 1/6, 1/12, 1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, 1/1250, 1/1750, 1/2500, 1/3500, 1/6500, 1/10000.
Auto Zooming Tracking Dome Camera User Manual AU+DSS+IR1, AU+DSS+IR2, AU+DSS+IR3, SHUTTER PR, IRIS PRIO, and AGC PRIORI. IR CUT FILTER Settings include: IN and OUT. LOW LIGHT LIMIT Settings include: 1/1.5, 1/3, 1/6, 1/12, 1/25, 1/50. SHUTTER Settings include: 1/30000, 1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/150, 1/100, 1/50, 1/25, 1/12, 1/6, 1/3, 1/1.5. IRIS LEVEL Iris level is the lens function that automatically opens and closes the iris in response to changing light conditions.
Auto Zooming Tracking Dome Camera User Manual OTHERS IR CUT FILTER AUTO IR CUT FILTER COLOUR AUTO IRIS ON SHARPNESS ON SHARPNESS LEVEL 5 AUTO WHITE BALANCE ON/OFF R GAIN 214 B GAIN 164 BACK EXIT Figure 3.8A OTHER MENU OTHERS AUTO IRIS AUTO IRIS LEVEL AUTO IRIS PEAK SHARPNESS SHARPNESS LEVEL AUTO WHITE BALANCE R GAIN B GAIN BACK EXIT ON 91 16 ON 39 ON 652 427 Figure 3.8B OTHER MENU Note: Figure 3.8A shows Other Menu only for models named TRKPTZ18XX and TRKPTZ26XX. Figure 3.
Auto Zooming Tracking Dome Camera User Manual closes the iris in response to changing light conditions. Program the auto iris to operate automatically or at a user-defined level. OFF: Auto iris is disabled, and for manually control only. AUTO: The iris is adjusted automatically to produce a constant video output as determined by the Auto Iris level setting. NOTE: If auto iris is in auto mode, it will remain that status until the iris is manually opened or closed.
Auto Zooming Tracking Dome Camera User Manual change the value, the color changes on your monitor. 3.5.3 Motion Setting Move joystick to select , press Open to enter the motion menu shown as Fig3.9. MOTION AUTO FLIP ON/OFF PROPORTIONAL PAN ON/OFF PARK TIME(MINUTES) 0 PARK ACTION NONE SCAN SPEED(DEG/S) 1 < SET SCAN> < MANUAL LIMIT> < SET AZIMUTH ZERO> < CLEAR AZIMUTH ZERO> BACK EXIT FIGURE 3.
Auto Zooming Tracking Dome Camera User Manual PROPORTIONAL PAN: Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the zooming times. At telephoto zoom settings, the pan and tilt speeds will be slower for a given amount of joystick deflection then at wide zoom settings. This keeps the image from moving too fast on the monitor when there is a large amount of zoom. There are two proportional pan modes: ON (default): Enables the proportional pan mode.
Auto Zooming Tracking Dome Camera User Manual PANTTERN 3: Dome runs pattern3. PANTTERN4: Dome runs pattern4. SCAN SPEED: Scan speed is that the dome will pan when in a FRAME SCAN mode. Scan speed is adjustable from 1 to 32 via the programming menu. SET SCAN STOPS: Set Scan Stops are programmable stops that limit the pan range of the dome. There must be two limits, a left and a right, to define an area. The dome reverses direction frame scanning when a limit stop is reached.
Auto Zooming Tracking Dome Camera User Manual (3) Follow the directions displayed on the monitor. SET AZIMUTH ZERO: Azimuth is the pan angle from 0°to 359°.Azimuth zero is the pan position you specify to be the 0°point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point. To program azimuth zero: (1) Move joystick to position the cursor beside set azimuth zero. (2) Press iris Open. (3) Follow the directions displayed on the monitor.
Auto Zooming Tracking Dome Camera User Manual This setting defines a specific activity (scan, preset, pattern) to be performed after the dome is powered up. Following settings are available: NONE (default): No action. AUTO SCAN: Dome starts auto scan operation. RANDOM SCAN: Dome starts random scan operation. FRAME SCAN: Dome starts frame scan operation. PRESET 1: Dome goes to preset 1. PRESET 8: Dome goes to preset 8. PATTERN 1:Dome runs pattern 1. PATTERN 2:Dome runs pattern 2.
Auto Zooming Tracking Dome Camera User Manual (1) Select preset number: a. Move joystick to position the cursor beside PRESET NUMMBER, press iris Open. b. Move the joystick up or down to view selections. Press iris Open to confirm selection. (2) Edit preset label. a. Move joystick to position the cursor beside EDIT Preset label. b. Press iris Open.
Auto Zooming Tracking Dome Camera User Manual (3) Edit preset scene: a. Move joystick to position the cursor beside EDIT PRESET SCENE. b. Press iris Open. c. Follow the direction displayed on the monitor. (4) Clear a preset: a. Move joystick to position the cursor beside CLEAR PRESET. b. Press iris Open. c. Follow the direction displayed on the monitor. 3.5.6 Patterns Setting Use stick to select Open to enter the patterns menu shown as Fig3.13.
Auto Zooming Tracking Dome Camera User Manual (2) Move the joystick up or down to view selections. Press iris Open to confirm selection. (3) Move joystick to position the cursor beside PROGRAM PATTERN. (4) Press iris Open. (5) Follow the directions displayed on the monitor. After a pattern is programmed, the remaining storage percentage will be displayed on the screen. This is the amount of memory available to program the remaining patterns.
Auto Zooming Tracking Dome Camera User Manual A zone is pan area, defined by a left and right limit on the 360-degree pan plane. There are altogether eight zones, each can be with a 6-character label. TO program a zone: (1) Move joystick to position the cursor beside ZONE NUMBER. Press iris Open. (2) Move the joystick up or down to view selections. Press iris Open to confirm selection. (3) Move joystick to position the cursor beside EDIT ZONE. (4) Press iris Open.
Auto Zooming Tracking Dome Camera User Manual (3) Move joystick to position the cursor beside a character. Press iris Open to confirm selection. To clear a character, position the cursor beside BP, and then press iris Open. (4) When a label is inputted, move the cursor to Ok, then press iris Open to save and return to the Preset menu. (5) When a label is inputted, move the cursor to CN, then press iris Open to cancel and return to the Preset menu.
Auto Zooming Tracking Dome Camera User Manual ZONES section. CLEAR PRESETS: Clear all presets. To clear a specific preset, please refer to the PRESETS section. CLEAR PATTERNS: Clear all patterns. To clear a specific pattern, please refer to the PATTERNS section. RESTORE FACTORY DEFAULTS: This is to restore leaving-factory‟s default settings. 3.5.9 Presets Number This is to set the dome‟s preset number. 3.
Auto Zooming Tracking Dome Camera User Manual Figure 3.17 DOME SETTINGS 3.6.1 Alarms Move joystick to select , then press Open to enter the alarms menu shown as Fig 3.18. ALARMS ALARM NUMBER SEQUENCE(SECS) < ALARM SETTINGS > BACK EXIT 1 1 Figure 3.18 ALARMS The dome has seven alarm inputs, which can be programmed as high, medium or low priority. When an alarm is received, the inputted signal to the dome triggers the user–defined action (go to preset, run pattern, etc.
Auto Zooming Tracking Dome Camera User Manual This is the length of time the dome considers the alarm to be active after it has physically cleared. 3.6.2 Alarms Setting Move joystick to select , then press Open to enter the alarm number menu shown as Fig 3.19. ALARM NUMBER ALARM PRIORITY ALARM ACTION ACTIVATE AUX ALARM CONTACT BACK EXIT 1 LOW NONE OPEN OPEN Figure 3.19 ALARM SETTINGS Follow below steps to program alarm settings. Select alarm number: (1) a.
Auto Zooming Tracking Dome Camera User Manual (2) Press iris Open. (3) Move the joystick up or down to view the available selections. Available settings include HIGH, MEDIUM, and LOW (default). If multiple alarms with different priorities are active at the same time, the dome will only go to the alarms with the highest priority. (4) Press iris Open to confirm selection. Set alarm action: (1) Move joystick to position the cursor beside Alarm action. (2) Press iris Open.
Auto Zooming Tracking Dome Camera User Manual Set auxiliary to activate: (1) Move joystick to position the cursor beside ACTIVATE AUX. (2) Press iris Open. (3) Move the joystick up or down to view the following available selections. OFF (default): Not activated. 1:An alarm action will close AUX 1. 2: AN alarm action will close AUX 2. (4) Press iris Open to confirm selection. Set alarm contact: (1) Move joystick to position the cursor beside ALARM CONTACT. (2) Press iris Open.
Auto Zooming Tracking Dome Camera User Manual AUX DWELL TIME 1 DWELL TIME 2 BACK EXIT 0 0 Figure 3.20 AUX An auxiliary output is a programmable signal from the dome back box that can trigger another device to operate. An auxiliary out put is programmable to trigger from an alarm or from a controller. An AUX 1 command from the controller will place a ground at the output of AUX 2 to operate the device that is connected to it. Setting include: 0~30secs.
Auto Zooming Tracking Dome Camera User Manual PASSWORED EBABLE PASSWORD BACK EXIT OFF Figure 3.21 PASSWORED This setting protects it from unauthorized changes to the dome settings. ENABLE PASSWORD: Open or close the password features. EDIT PASSWORD (Four Numbers): PLEASE INPUT OLD PASSWORED PASSWORD 1234567890 CLEAR ENTER EXIT Figure 3.22 EDIT PASSWORD (1) Move joystick to position the cursor beside a number. Press iris Open to confirm selection.
Auto Zooming Tracking Dome Camera User Manual 3.6.5 Windows Blanking Move joystick to select , then press Open to enter the windows blanking menu shown as Fig 3.23. WINDOWS BLANKING STYLE GRAY BLANK ALL ABOVE OFF BALANK ALL BELOW OFF BACK EXIT Figure 3.22 WINDOWS BLANKING Window blanking enables you to program up to eight, four-sided, user-defined areas that cannot be viewed by the operator of the dome system.
Auto Zooming Tracking Dome Camera User Manual Blanking Parameters: 80 BLANK ALL ABOVE BLANK ALL BELOW OFF No Blanking OFF No Blanking 0 -5º~10º 0 5º~92º 10 -5º~25º 10 -5º~92º 20 -5º~35º 20 5º~92º 30 -5º~45º 30 15º~92º 40 -5º~55º 40 25º~92º 50 -5º~65º 50 35º~92º 60 -5º~75º 60 45º~92º 70 -5º~85º 70 55º~92º -5º~95º 80 70º~92º 3.6.6 Set Windows Move joystick to select , then press Open to enter the set windows menu shown as Fig 3.24.
Auto Zooming Tracking Dome Camera User Manual blanking : set the zoom of the blanking. The blanking will take effect when the video is zoomed to this time or above. Enable Windows: Enable or disable the current blanking Clear windows: clear the current windows blanking Operation: 1. Move joystick to select a item 2. Press iris Open 3. Move joystick to select parameters 4. Press Open 3.6.
Auto Zooming Tracking Dome Camera User Manual 2. From the menu of Fig. 3.25, press Close to return to the menu of Fig 3.24 3. From the menu of Fig. 3.25, press Open to enter menu of Fig 3.26 to edit the windows location. EDIT WINDOW LOCATION Figure 3.26 EDIT WINDOW LOCATION 4. From the EDIT WINDOW LOCATION menu shown in Fig 3.26: Move joystick left; zoom in (left/right) from the zone center. Move stick right; zoom in (left/right) from the zone center. Move stick up; zoom in (up/down) from the zone center.
Auto Zooming Tracking Dome Camera User Manual Press Close to discard the setting and return to Fig 3.24 Press Open to save the setting and return to Fig 3.24. 3.6.9 Heater Setting From the dome setting 2 menu shown in Fig3.17, move joystick and move cursor to HEATER SETTING, press Open to enter the following menu (Figure 3.28). HEATER SETTING HEATER DISPLAY ON HEATER MODE AUTO TEMPERATUEE SET 33℃ BACK EXIT Figure 3.28 HEATER SETTING HEATER DISPLAY: Heater display shows heater state.
Auto Zooming Tracking Dome Camera User Manual Temperature set is to set the heater‟s startup temperature. Operations: 1. Move joystick to select an item. 2. Press Open. 3. Move the stick to select a parameter. 4. Press Open. 3.6.10 Cruise Setting From the menu shown in Fig3.17, move joystick to select , press Open to enter the following menu. CRUISE DWELL TIME PRESET LIST 1 ON 0 OFF 1234567890 0110010111 BACK EXIT 7 1 Fig 3.
Auto Zooming Tracking Dome Camera User Manual 1 ON 0 OFF: Note, they are not changeable, 1234567890: display info, not changeable. When the preset list is 1, “1, 2, 3, 4, 5, 6, 7, 8, 9, 0” indicates presets from 1 ~ 10. When it is 2, it indicates presets from 11 ~ 20. When it is 3, it indicates presets from 21 ~ 30. 0 0 0 0 0 1 0 1 0 1: select the cruising presets. 1 for cruising, 0 for not cruising. Operations: 1.From the menu in Fig3.21, select relative item of “1234567890” with the joystick. 2.
Auto Zooming Tracking Dome Camera User Manual Size SNS: the size of the target in the screen, Medium, Large, Small are selectable GRAY SNS: the sensitivity of the moving object, Medium, High and Low are selectable LOST AC: the action when the moving object is lost. Parameters include: return home and tracking, keep tracking, stop tracking AUTO ZOOMING: The dome will auto zoom in / out according to the size and distance of the object. Parameters can be ON/OFF.
Auto Zooming Tracking Dome Camera User Manual 3.6.12 Tracking Boundary From the menu in Fig3.30, move the cursor to < TRACKING BOUNDRAY >, press Open to enter the following menu (Figure 3.31) TRACKING BOUNDARY BOUNDARY LIMIT CLEAR BOUNDARY LEFT LIMIT RIGHT LIMIT UP LIMIT DOWN LIMIT BACK EXIT OFF OFF OFF OFF OFF Figure 3.
Auto Zooming Tracking Dome Camera User Manual 3.7 Dome Label From the menu shown in Fig3.1, move the cursor to , press Open to enter the following menu (Figure .32) DOME LABLE BACK EXIT Figure 3.32 DOME LABLE : To edit the dome description and information. Please refer to 3.5.4 Edit Preset Label”. : Clear current dome label. Press Open to enter the menu and then operate with instructions. 3.