Specification

PLASKOLITE, LLC.
SAFETY DATA SHEET
OPTIX® Acrylic Sheet
Page 2 of 4
6. ACCIDENTAL RELEASE MEASURES
Personal Precaution: Provide adequate ventilation. Wear personal protection equipment. Do not
breathe dust.
Environmental Precaution: Do not allow to enter into soil, waterbodies or drains.
Methods for Cleaning Up: Avoid generation of dust. Remove all sources of ignition. Sweep or scoop
up into closed containers for disposal.
7. HANDLING AND STORAGE
Max. Storage Temperature: 190°F (88°C)
Handling: Ensure appropriate exhaust and ventilation at machinery and at places
where dust can be generated. Avoid dust formation, and accumulation of
static charges. Prohibit sources of spark and ignition, such as smoking.
Processing of this product under high temperatures will cause hazardous
emissions of vapors, carbon monoxide or carbon dioxide.
Storage: If this material is stored under ambient temperature conditions, it is not
hazardous. However, extensive storing at higher than the maximum
temperature will emit vapors, carbon monoxide or carbon dioxide.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Limits : Not applicable
Ventilation Measures: Provide good ventilation and/or an exhaust system in the work area.
Respiratory Protection: None required under normal conditions.
Hand Protection: Canvas or cotton gloves.
Eye Protection: Safety glasses with side shields (ANSI Z87.1 equivalent).
Skin & Body Protection: Wear suitable protective clothing and boots.
Other Protective Measures: Avoid contact of molten material with skin. Do not inhale dust particles or
vapors. Keep away from sources of ignition. Wash hands before breaks
and after work.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid sheets
Color: Clear to opaque
Odor: Not applicable
pH: Not applicable
Melting Point: 300°F (150°C)
Boiling Point: Not available
Decomposition Temperature: Not available
Flash Point: 689°F (365°C)