MODEL : TLP150HDW License Plate Camera QUALITY PRODUCTS FOR THE PROFESSIONAL INSTALLER
MODEL : TLP150HDW Table of Contents INTRODUCTION 3 Contents DEVICE 4 INSTALLATION Wiring 5
MODEL : TLP150HDW INTRODUCTION Congratulations on your purchase of the Optix “License Plate Camera”. With camera installed, you are able to have a great visual of what is behind your vehicle while going in reverse. You also get parking Lines to guide you while backing up into a parking space, driveway, bays, etc.
MODEL : TLP150HDW DEVICE 1. Mount the camera license plate bracket to the OEM license plate mounting location . 2. Route wires into the vehicle 3. Depending on the camera location/orientation please use wiring diagram below: * Monitor Not Included Green Loop : Not Cut - Parking Lines Cut - No Parking Lines Flush Mount 22mm hole required for Flush Mounting White Loop : Not Cut - Mirror Image Cut - Non Mirror Image Mount The Camera License plate bracket with .
