User's Manual

CRD-3301 SS08xxx

Flow Control Time Out Menu / Command

Indefinitely (default) I0 (Indenfinitely)

100msec I1

200msec I2

400msec I3

Figure 9: Cannot receive command

CTS / TXD Signal Timing

When the CTS line (RTS signal of the host) is turned OFF while sending a TxD signal, the

scanner transmits one character and waits. When the CTS signal is turned ON while

transmitting a character, the character will be transmitted.

Figure 10: Signal timing

Note: When using loopback (wire connection) for RTS, CTS line of the

scanner in this setting, No handshake is not enabled.