User Manual

H-1311-BTH SS08xxx
22
17.4. Export Administration Regulations
This product is subject to the strategically controlled exports regulated under “Foreign
Exchange and Foreign Trade Laws”. Therefore, export of this product may require an export
permission of Japanese government.
17.5. Radio Communication
• To start IrDA communication through the H-1311-BTH, the device used as a receiver is
required followings;
- to be compliant with the same version as H-1311-BTH
- to have the same profile as H-1311-BTH
• The connection with a recipient without preliminary test is not guaranteed.
• Since the communication uses the 2.4 GHz, it may be interrupted by various devices
using the same frequency bands.
• This product (with national specification) should only be used in Japan. The use of the
product outside Japan may be fined.
• Baud rate and communication distance vary depending on obstructions between the
devices, radio wave condition, and the receiver.
17.6. Frequency Band
The frequency band 2.4 GHz is utilized by this scanner. Read carefully the followings before
using this product.
In the frequency band of this scanner, scientific, medical and industrial devices including
microwaves are used. Also other radio stations including local private radio station for mobile
object identification requiring license for such as manufacturing lines at factories, specific
power-saving radio station requiring no license and amateur radio station are managed.
Please make sure that “other radio stations” are not managed in the frequency band 2.4 GHz
before using this scanner.
In case that radio interference occurs between this scanner and “other radio stations,”
change the service space immediately, or stop transmitting radiowave to avoid the
interference.
If you have any questions or troubles, please contact our marketing group.