User Manual

H-1311-BTH SS08xxx
3
Antenna 1/4λ (surface mounted)
Infrared
communication
Compliant with IrDA 1.2
*Speed (SiR): 9600～115.2k(BPS)
(FiR): 4Mbps
Note:
These are theoretical
figures and were not
actually measured.
RTC(clock) Available
YY/MM/DD/HH/MM/SS
(Accurate Within 90 Seconds per Month)
Main Battery
Lithium-ion Battery (3.7V 1100mAh)
AA alkaline battery×2
Backup Battery
Coin-type lithium-ion secondary battery
(18mAh)
For RAM / RTC back up
Up-time
(*1)
Lithium-ion Battery: rs
AA alkaline battery: hrs
Bar Code Scanning:
Twice in 10 seconds
(Electrical cooperation
mode B)
Power Supply
Section
Data holding time
(*2)
7days or longer Back up for RAM / clock
Light-emitting element Red-visible light semiconductor laser
Laser wave length / output 650±10nm, lower than 1mW, 25°C
Scanning frequency 100±20scan/sec
Minimum resolution 0.127mm
Scanning distance 55 to 520mm Resolution:1.0mm PCS: 0.9
Scanner section
Symbologies
JAN, EAN, UPC-A, UPC-E, NW-7(Codabar),
Industrial 2of5, Interleaved 2of5,
Code 11, Code 39, Code 93, Code 128,
MSI/Plessey, UK/Plessey, IATA, Telepen,
Matrix 2of5, S Code, Tri-Optic,
Chinese Post Matrix 2of5, EAN 128,
RSS-14, RSS Limited, RSS Expanded,
PDF417, MicroPDF417
*Please refer to the section 8
for further information.
Developmental
environment
C language
Application development
environment
Operation -10°C to 50°C
Temperature
Storage -20°C to 60°C
Operation 20%RH to 85%RH No condensation, no frost
Humidity
Storage 20%RH to 85%RH No condensation, no frost
Charging temperature 0 to 40°C
Frequency 3 cycles (6 sides considered as one cycle)
Height 150cm
Drop
test
(*3)
Floor Concrete
Environmental
condition
Water and drip proof Compliant with JIS IP-54
Dimensions 159.0 × 52.8 × 30.5mm
Weight Approximately 180g (including AA alkaline battery)
Hand strap×1
AA alkaline battery×2
Accessory
Users manual×1