User Manual

4. Detailed View
4.1 OPI-4002 (Scanner)
②型式認定ラベル
①
製品銘板
⑥ け穴ストラップ取り付
⑤電池蓋
③トリガスイッチ
⑩充電端子(+)
⑦ブザー音孔
⑪充電端子（-）
④読み取り窓
⑧LED窓
⑨DCジャックキャップ
⑥ス 穴トラップ取り付け
2. Product type
identification label
6. Hand strap hole
1. Scanner
identification
4. Reading window
3. Trigger switch
6. Hand strap hole
5. Battery case cover
8. LED window
7. Buzzer sound hole
11. Electrical contacts (-)
9. DC jack cap
10. Electrical contacts (+)
Name Function
1. Scanner identification
2. Product type identification label Wireless certification label
3. Trigger switch Press the switch when scanning bar code.
Laser beam for barcode reading will be emitted from here. The camera module
(consists of lighting LED, aiming LED and light detecting lens) is equipped inside this
window.
4. Reading window
5. Battery case cover
6. Hand strap hole Attach hand strap
7. Buzzer sound hole Show the status of success or failure of scanning and error occurrence.
Show the status of scanning, transmission of bar code data to
OPA-1001, charging and remaining battery power.
8. LED window
A cap to protect DC jack for charge. Uncap when charging the scanner
by plugging the dedicated AC adapter (accessory) directly into it.
9. DC jack cap
10. Electrical contacts (+)
When using the dedicated charger CHG-4001 (option), the power will be supplied via
the feeding terminals.
11. Electrical contacts (-)
16