User Manual
Table Of Contents
- 1.安全上のご注意
- 1. Precautions for Your Safety
- 2.取り扱い上のお願い
- 2. Handling Precautions
- 3.梱包内容の確認
- 3. Package Contents
- *Dedicated adapter may not be packaged with the scanner due to the specification difference. 4.各部の名称と機能
- 4. Detailed View
- 5.ご使用にあたって
- 5.Getting Started
- _
- 6.バーコードの読み方
- 6.Scanning Bar Codes
- 7.無線接続について
- ※本設定は追加設定です。初期設定では使用できません。 7.Wireless Connection
- 8.無線設定手順
- 8.Wireless Settings
- 9.出荷時の設定
- 9.Default Settings
- 10.設定用メニューバーコードについて
- 10.Menu Bar Code Labels
6.Scanning Bar Codes
Press the trigger switch to emit lighting LED and start a scanning of bar codes.
30
80
130
180
[in the millimeters]
Horizontal Direction
Distance from a Mask of a Camera
* Aiming is a guide to support the scanning operation. Note that an aiming pattern does not indicate exact sannable
width nor distance between a scanner and a bar code.
Aiming Guideline
・ To scan a bar code within a width of aiming range, make sure that two central LED light patterns overlap together.
Then locate the center of the overlapped LED light pattern on the center of the bar code.
・ To scan a bar code wider than a width of aiming range, aim the bar code from farther point. Make sure that the bar
code is in between two LED light patterns at right and left ends.
●
Due to specular reflections, scanning performance may differ depending on the material of the media on which
the target bar code is printed. Please incline the scanner at about 15 degrees when you have difficulties in
scanning bar codes due to specular reflections.
26