User's Manual

OPN-3102n

1st

SPECIFICATIONS MANUAL

9.5 Vibration Strength (without packing)

There shall be no sign of malfunction after the following vibration test.

Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated

velocity of 19.6m/s

(2.0 G) for 30 minutes (60 minutes per cycle) in non-operating state.

Repeat this in each X, Y and Z direction.

9.6 Vibration Strength (in individual packing)

There shall be no sign of malfunction after the following vibration test.

Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated

velocity of 19.6 m/s

(2.0 G) for 30 minutes (60 minutes per cycle) in individually packaged state.

Repeat this in each X, Y and Z direction.

9.7 Drop Impact Strength (without packaging)

There shall be no sign of malfunction after the following drop test.

Drop test: Drop the scanner 18 times in total (3 times at each 6 face), from a height of 150 cm

onto a concrete floor as shown below.

150cm

Figure 11: Drop Test

9.8 Drop Impact Strength (in individual packaging)

There shall be no sign of malfunction after the following drop test.

Drop test: Drop an individually packaged scanner 10 times in total, at any of 1 corner, 3 edges,

and 6 faces, from a height of 150 cm onto a concrete floor.

9.9 Electrostatic Discharge Immunity

Air discharge ±8 kV max. (No malfunction)

±15 kV max. (No destruction)

Measurement environment An electrostatic testing device compliant with IEC 61000-4-2

Discharge resistance 330 Ω

Charging capacitor 150 pF