User's Manual

OPN-3200n
Specifications Manual
14
8.8. Auto Trigger
When the scanner is placed in a dedicated stand (sold separately) which contains a magnet, it can
detect this magnet and enters auto trigger mode. The scanner starts scanning automatically when it
detects a change in brightness that occurs when a bar code label is presented in front of it.
8.8.1. Stand Detection
“Stand detection - Auto trigger Flow”
Figure 7: Stand Detection Flow
* The dedicated stand is an optional accessory that can be purchased separately.
* The stand detection mode is disabled by default. It must be enabled to be used.
8.8.2. Auto Trigger Operation
Trigger should be enabled when a gray-colored paper is presented in front of a background
black-colored paper. Trigger should also be enabled when the black-colored paper is
presented in front of the background gray-colored paper.
<Conditions>
Paper : Black paper from Glory: Black 010010016
: Gray paper from Glory: Silver-gray 010010016
Ambient light : 500 ~ 1000 lx
Moving speed of paper : 2 m/sec or slower
Temperature / Humidity : Room temperature / room humidity
Figure 8: Auto Trigger
Paper
Background
Detection ran
g
e
Is Stand Detection
mode “*4” enabled?
A
uto Trigge
r
Yes
Yes
No
Manual Trigger
No
Is the scanner
in the stand?