OPR-3301 SS08xxx Master Specifications Handy Laser Scanner Product Name Specification No. Edition OPR-3301 SS08xxx Initial release Date of Publication T.B.D Original Spec. No. SS08xxx Optoelectronics Co., Ltd.
OPR-3301 SS08xxx Revision History Specification Number: SS08xxx Product Name: OPR-3301 Revision Date Section Initial T.B.
OPR-3301 SS08xxx Table of Contents 1. Overview ...................................................................................................................1 2. Abstract .....................................................................................................................1 3. Basic Specifications...................................................................................................1 4. Detailed View ..........................................................................
OPR-3301 SS08xxx 1. Overview This manual provides specifications for the wireless handy laser scanner, OPR-3301. 2. Abstract The use of a short-wavelength red laser beam enhances the visibility of scanning lines. ・Efficient reading performance using laser light The use of a short-wavelength red laser beam enhances the reading performance. With a high level -visibility of scanning lines and its gun-type grip, it is easier to target the objective barcodes and it release operators from the physical load.
OPR-3301 SS08xxx 3. Basic Specifications Item Specifiaction Control Section MPU Remark 32 bit ST Micro STR710FZx FROM Clock:48MHz 1Mbits SRAM 1Mbits 2402MHz to 2480MHz Frequency Wireless communication section Optical Section Specification Bluetooth Ver1.2 Compliant Transmission output Communication range Baud rate Antenna Class 2(4dBm or less) 10m 115.2kbps 1/4λ (Surface mounted type) The communication distance may vary. Reading method 1.
OPR-3301 SS08xxx Item Specifiaction Environmental Specifications Operation Storage Temperature Operation Humidity Storage Incandescent light Sun light Ambient light immunity Dust and drip proof -5 to 50°C -20 to 60°C 5 to 95 % (No condensation, no frost) 5 to 95 % (No condensation, no frost) Shock Regulatory compliance Laser safety EMI 50,000 lx or less IP42 compliant Product safety IEC/EN 60950-1 Immunity EN61000-6-1 Others Logo certification Static electricity No malfunction No destruct
OPR-3301 SS08xxx 4. Detailed View 3 4 2 1 Figure 1: Detailed view No. 1 Name Trigger switch 2 Light receiving lens 3 Status LED 4 Buzzer holes Function To capture and decode a barcode image, you need to press the trigger switch. The scanner captures a barcode image through a light receiving lens. Make sure the lens is clean before scanning. The status LED lights up green when the scanner registers a successful read. The buzzer sounds through these holes.
OPR-3301 SS08xxx 4.1. Status LED and Buzzer OPR-3301 notifies its operation state with LED and buzzer on its head section. Status While charging Barcode scanning Connecting Bluetooth LED Red Green Indication Lighting Lighting Blue Red Green Blue Red Blinking Continuously blinking Lighting Details of the status Shows that the scanner is being charged after setting it on the cradle. Shows the completion of charging.
OPR-3301 SS08xxx 5.3. Charging Current Status Specification Remark When connected to RSS232C (using a AC adapter). When connected to USB. Bus power class: Hi-PO WER(500 mA)。 Nom500 mA。 600 mA or less Charging with CRD-3301 300 mA or less Measurement condition / others ・Measured at 25°C. ・Temperature should be between 0 to 40°C when charging scanner. (Charging may be stopped when the temperature is over 40°C due to the thermo protection.
OPR-3301 SS08xxx 6. Optical Specifications 6.1. Laser Scan Specifications Parameter Specification Unit Light-emitting element Red laser diode - Emission wavelength 650±10 nm (25°C) nm Light output 1.0 mW or less (Class 1) mw Scanning method Bi-directional scanning - Scanning speed 100±20 scans/s Scan angle 54±5 ° Read angle range 44 (Min) ° Scan angle 6.2.
OPR-3301 SS08xxx 7.2. Scan Area and Resolution Figure 4: Depth of Field Resolution 1.0mm 0.5mm 0.25mm 0.15mm 0.127mm Symbology Code 39 Code 39 Code 39 Code 39 Code 39 PCS 0.9 0.9 0.9 0.9 0.
OPR-3301 SS08xxx 7.3. Curvature 7.3.1. Pitch Angle α ≤ ±35° 7.3.2. Skew Angle β ≤ ±50° (Excluding dead zone) 7.3.3. Dead Zone β ≤ ±8° (There are some areas in which decoding fails due to specular reflection) 7.3.4. Tilt Angle γ ≤ ±20° Barcode: Pitch, Skew angle, Dead zone PCS = 0.9, Resolution = 0.25 mm, Symbology = 9-digit Code 39, Quiet Zone = 10 mm, N/W Ratio = 1:2.5 Tilt Angle PCS = 0.9, Resolution = 0.
OPR-3301 SS08xxx 7.4. Curvature With 8-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R≥15 mm. With 13-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R≥20 mm. Barcode Figure 6: Curvature Barcode Sample: OPTOELECTRONICS Test Sample PCS = 0.9, Resolution = 0.26 mm, Symbology = 9-digit Code 39, Quiet Zone = 10 mm Distance: 60 mm from the edge of the scanner Angle: Skew angle: β=+15° 8. Bluetooth OPR-3301 uses ver.1.
OPR-3301 SS08xxx 9. Default Setting Scan the following menu barcodes to return to the default settings.
OPR-3301 SS08xxx Default Settings 2: Read Options, Trigger, Buzzer Item Setting the number of characters Read mode Multiple read reset time Add-on wait mode Multiple label read Multiple column read Redundancy (*1) Trigger switch Trigger repeat Auto trigger Read time Margin check Buzzer duration Buzzer loudness Start up buzzer Good read LED Default Setting Fixed length OFF all codes Single read 500 ms 500 ms Disable Disable Read 1 time, redundancy = 0 Enable Disable Disable 2 seconds (when trigger enabled
OPR-3301 Default Settings 3-2: Read, trigger and buzzer options Parameter Baud rate Parity bit Data length Stop bit Hand shaking ACK/NAK CS time out Inter character delay SS08xxx Setting 9600 bps No parity 8 bits 1 bit No handshake Nonprocedural Indefinitely No delay Default Settings 3-3: Communication between CRD-3301 and host with USB cable Item Keyboard language Numerical output Caps Lock mode Inter character delay Default setting USA Full Key Code No Caps Lock Mode No deklay 12
OPR-3301 10. SS08xxx Default Setting The serial number shown below is affixed to the scanner. Model name label Logo label Serial label Figure 7: Curvature Model name label: Shows product name, product number, production date and the laser class “2” logo. Logo label: Shows the regulations which the scanner supports. Serial label: Shows grant number and descriptions which are compliant with the regulations.
OPR-3301 11. SS08xxx Packaging Specifications 11.1. Individual Packaging Specifications Put the scanner in the box after putting it in the foam bag.
OPR-3301 SS08xxx 11.2. Collective Packaging Specifications Figure 8: Individual Packaging Specifications Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the EU.
OPR-3301 SS08xxx 11.3. Accessory Specifications The following table shows a list of accessories for each model. - User’s manual - Dedicated battery pack (BTR02001030-0-00) 12. Environmental Specifications 12.1. Operation Temperature and Humidity -10 to 60°C (When charging: 0 to 40°C) 5 to 95% (No condensation, no frost) * Charging may be stopped when the temperature is over 40°C due to the thermo protection. 12.2.
OPR-3301 SS08xxx 12.5. Electrical Specifications Specifications mentioned below include combination of the scanner and CDR-3301.
OPR-3301 13. SS08xxx Reliability MTBF (Mean Time Between Failures) of this product is as follows. Product (excluding laser module): 48,000 hours Laser module: 10,000 hours *The estimate of MTBF and product life cycle is based on standard operation of the product within the recommended temperature range and without extreme electronic or mechanical shock. *The figure specified above does not consider the battery pack, because it can be easily affected by environments and charging conditions. 14.
OPR-3301 SS08xxx 17. Precautions 17.1. Precautions about laser light ・Do not stare into the laser light from a scanning window. It may harm your eyes. ・Do not point the laser directly at others’ eyes. It may harm your eyes. ・Do not stare into the beam with optical instruments. It may harm your eyes. Caution - Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure 17.2. Handling (1) Shock ・Do not throw or drop the scanner.
OPR-3301 SS08xxx 17.5. Bluetooth To communicate via Bluetooth, the device which OPR-3301 is connected to must support the same Bluetooth version and profile as OPR-3301’s. ・ OPR-3301 is compliant to Bluetooth standards. However, we cannot assure the connection between OPR-3301 and other Bluetooth devices which have not been tested. ・ Bluetooth supporting devices use 2.4 GHz frequency band. However, many other sorts of devices also utilize this frequency band.
OPR-3301 SS08xxx 18. Auto Trigger Auto Trigger Sensor When auto trigger is used, the scanner starts barcode reading after detecting a change in reflection in the detection area. The scanner will be triggered if the sensors detect changes in brightness in the detection area. Auto trigger distance: 40mm from the edge of the scanner.
OPR-3301 SS08xxx Appendix. Mechanical Drawing Dimensions: 165(H)×68(W)×155(D) *Excluding intruding portions.