PX-25 SS08068 Master Specifications 2D Data Collector with Bluetooth Product Name PX-25 Specification No SS08068 Edition Initial release Date of Publication Nov 5,2008 Original Doc. No. SS08059 OPTOELECTRONICS Co., Ltd.
PX-25 SS08068 Revision History Specification No.
PX-25 SS08068 Table of Contents 1. Abstract ............................................................................................................................. 1 2. Overview ........................................................................................................................... 1 3. Physical Features.............................................................................................................. 2 4. Basic Specifications............................................
PX-25 SS08068 1. Abstract This manual provides specifications for the data collector with an embedded 2D data collector which offers Bluetooth, PX-25. 2. Overview ・ PX-25 consists of a 130 million pixel-CMOS sensor and a wide angle lens with Bluetooth. ・ Scanned data is output via Bluetooth interface. ・ Bluetooth and IrDA (for the communication with the dedicated cradle) interface enables data communication with higher models. ・ This product is compliant with RoHS. 2.1.
PX-25 SS08068 3. Physical Features 3.1. Dimensions Figure1: Dimensions 3.2. Weight Max.
PX-25 SS08068 3.3. Physical Features 1 2 3 4 5 10 6 11 7 12 13 9 8 Figure2: Physical features No. 1. 2. Item Scanning window IrDA 3. LED 4. 5. 6. 7. 8. 9. LCD Trigger key Up / Down keys 10 operational keys DC Jack Speaker 10. Terminals 11. 12. 13. Battery cover Battery cover lock Strap hole Specification LED light for scanning barcode is emitted from the window.
PX-25 SS08068 4.
PX-25 SS08068 Scanning method CMOS area sensor (black/white) Effective pixels 1.3 million pixels Light source Red LED Scanning angle range Horizontal: 47° MSI-1001 Vertical: 37.
PX-25 SS08068 5. Optical Specifications Item Specifications Scanning method CMOS area sensor (black/white) Scanning speed 30 Effective pixels 1280(H)×1024(V) Aiming LED center wave length (green LED x 2) Illumination LED center wave length (Red LED x 4) Unit fps Pixel 527 nm 630 nm Scan angle Horizontal: 47 Focal plane 85 Vertical: 37.5 ° mm 6. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section.
PX-25 SS08068 Number of Resolution Error correction PCS Size [mm] 0.339mm M 0.9 10×10 44 0.169mm M 0.9 5×5 44 character Barcodes printed by a normal printer Number of Resolution Error correction PCS Size [mm] 0.339mm ECC200 0.9 8×8 40 0.169mm ECC200 0.9 4×4 40 character Barcodes printed by a normal printer *As for the size of each barcode, quiet zone length is excluded. 6.1.
PX-25 SS08068 6.2. Printed Contrast Signal 0.45 (MRD 32%) or higher (over 70% of reflectivity of space and ) *Scanning performance may decline if dirt or scratches mar the optical window. Keep the optical window clean. 6.3. Pitch, skew and tilt Pitch angle: α = ±50° Skew angle β = ±60° Tilt angle: γ = 360° Conditions: Barcode sample: CODE-39, PDF417, Resolution 0.254mm, PCS0.9 as specified in the section 6.
PX-25 SS08068 6.4. Curvature With 8-digit JAN barcode, decoding performance is guaranteed when R≥15 mm. With 13-digit JAN barcode, decoding performance is guaranteed when R≥20 mm. Conditions Barcode sample: CODE-39, PDF417, Resolution 0.254mm, PCS0.9 as specified in the section 6.
PX-25 SS08068 7. Aiming During scan operation, the Green LED patterns as shown below will be exposed. It is called as “Aiming” and is superimposed on the illuminated scan field. 7.1. Aiming Pattern Unit: mm [単位:mm] Distance from the focal plane 30 80 130 180 (水平方向画角) Horizontal angle of view Figure6: Aiming * Aiming is a guide to support the scanning operation. Note that an aiming pattern neither indicate exact sannable width nor distance between a data collector and a barcode. 7.2.
PX-25 SS08068 8. Bluetooth 8.1. Installed Profile Bluetooth wireless communication is used as a wireless interface. 8.2. Communication Configuration 1 to 1 (One data collector to one host system) 8.3. Operating Mode While Connected to the Host System Master mode 8.4. Security Mode Authentication enabled 8.5.
PX-25 SS08068 9. Serial Label The labels shown below are affixed to the data collector.
PX-25 SS08068 10. Packaging Specifications 10.1. Individual Packaging Specification Put the data collector in a protective foam bag and place it in an individual packing box. Size of the package (after assembly) 255(W) × 120(D) × 105(H) mm Figure9: Individual packaging specification (T.B.
PX-25 SS08068 10.2. Collective Packaging Specification Figure10: Collective packaging specification (T.B.D ) Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the European Union.
PX-25 SS08068 11. Durability 11.1. Ambient Light Immunity Decoding performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light Fluorescent light Sunlight 10,000 lx 10,000 lx 1000,000 lx Conditions Barcode sample: CODE-39, Resolution 0.254mm, PCS0.9 as specified in the section 6.
PX-25 SS08068 11.7. Static Electricity Air discharge: ±10 kV max. (No malfunction) ±15 kV max. (No destruction) Contact discharge: ±6 kV max. (No malfunction) ±10 kV max. (No destruction) Measurement environment: Use electrostatic testing device compliant with IEC 61000-4-2. Discharge resistance: 330 Ω Capacitor charging: 150 pF 11.8. Reliability MTBF (Mean Time Between Failures): 5 years Life cycle of the CMOS camera: 150,000 hours 12. Warranty 12.1. Warranty Period Optoelectronics Co., Ltd.
PX-25 SS08068 13. Regulatory Compliance 13.1. LED Safety (for illumination) ･IEC60825-1+A2:2001 Class 1 ･JIS C 6802:2005 Class 1 13.2. Product Safety ･IEC60950-1 ･EN60950-1 13.3. EMC ・EN55024 ・VCCI Class B ・FCC Part 15 Subpart B Class B ・FCC Part 15 Subpart C FCC Part15 subpart B&C Statement This device complies with part 15 of the FCC Rules.
PX-25 SS08068 13.4. R&TTE ・EN300 328 ・EN301 489-1 ・EN301 489-17 13.5. Others ・Certification for Construction Design of Specified Radio Equipment ・Bluetooth logo certification 14. RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC. 15. Precautions 15.1. Precaution about the LED Light Do not stare into the laser light from a scanning window. It may harm your eyes.
PX-25 SS08068 (3) Foreign Materials ・Do not put the data collector into liquid. ・Do not put the data collector into chemicals. (4) Others ・ Do not disassemble this product. ・ Do not use the data collector near a radio or a TV receiver. It may cause reception problems. ・ The data collector may be damaged by voltage drops caused by lightning.
