Use Instructions

Instructions For Use
Page 7 / 47
IFU-3M001-EN-00 (2021.03.05)
LOAA(Lab on An Array) Real-Time PCR Instrument
C. Precautions on the operating environment
(1) Do not place anything near the equipment.
(2) Do not install the equipment in a dusty place. Excessive dust may cause equipment failure or damage.
(3) Do not install the equipment near a heat source. There is a risk of fire.
(4) Do not install the equipment near water or damp places. It may cause electric shock, fire or equipment
failure.
(5) Do not install the equipment near corrosive or flammable gases. If a corrosive or flammable gas leaks, do
not touch the power cord, but open the window for ventilation. Sparks on the power cord may cause fire
and explosion.
(6) Do not disassemble or modify the equipment in any way. It may cause fire, electric shock or equipment
failure, and in this case, the equipment cannot be guaranteed.
D. Warnings and Precautions on the equipment installation
(1) Do not install this equipment in a place exposed to direct sunlight.
(2) Please install the equipment on a stable flat surface.
(3) When installing the equipment, install it at least 15 cm from the nearest wall.
E. Warnings and Precautions for operating the equipment
(1) Remove dust around the power plug and connect it securely so that the plug does not shake. Incomplete
connections may cause fire.
(2) Operate the equipment at a temperature between 15℃~30℃(59~86℉). Exposure of the equipment at
high temperature may affect the equipment, causing inaccurate results.
(3) Operate the equipment in the recommended humidity range (20 ~ 80 %, free of moisture condensation).
Moisture may cause equipment corrosion or failure.
(4) Do not place anything on the side or back of the equipment. It may cause equipment failure.
(5) This equipment contains precision machined parts. Do not drop or shake it violently. It may break and
damage the safety of the equipment.
(6) If the equipment is not used for a long time, please turn off the power of the equipment and block the
external power supply. Otherwise, there is a risk of overheating and fire.
(7) It may cause burns to your hands or body. Do not manually open the cover during operation.
(8) If you touch ventilation openings or parts of equipment in operation, be careful as your hands may be
pushed, torn or subjected to static electricity shock.