Use Instructions

Instructions For Use
Page 8 / 47
IFU-3M001-EN-00 (2021.03.05)
LOAA(Lab on An Array) Real-Time PCR Instrument
F. Warnings and Precautions for using and maintaining the product
(1) Please use this product for nucleic acid amplification purpose. Do not use the equipment for any
purpose other than those specified in the Instructions For Use.
(2) Use only the supplied accessories and recommended cartridges.
(3) Do not modify or delete the equipment-related information displayed on the equipment.
(4) When using the touch LCD screen, do not use your fingernails or other sharp materials as they may
cause damage to the product.
(5) Do not use a strong surfactant or solvent to clean the surface of the equipment. The color of the
equipment may change. If this kind of material spills onto the equipment, wipe it off with soft cloth
immediately.
(6) Do not store the equipment in a humid place. If stored in such a place, it may be damaged by
moisture, and the damaged equipment cannot be guaranteed. In this case, repair may not be
possible.
(7) If the equipment is disassembled or remodeled, it cannot be guaranteed, and the service may be
refused.
(8) Do not disconnect the power cord while using the equipment. It may cause equipment failure.
(9) If there is a burning smell or if the equipment in operation is very hot, stop operating the equipment
immediately and contact customer service or your sales representative.
(10) Do not drop the equipment or apply any impact on it. The equipment may be damaged directly and
may not be guaranteed.
G. Precautions when moving the equipment
Improper lifting of the equipment may cause serious and permanent injuries to the waist. Depending on the
weight, more than two people may be required to move the equipment.
H. Warnings on Biological and Chemical Hazard Safety
(1) Biological samples such as tissues, body fluids and blood derived from human body may potentially carry
infectious diseases. Be sure to follow the regulations in your area and country. Wear safety goggles,
laboratory gowns and gloves during the experiment.
(2) Before handling chemicals, be sure to read the Material Safety Data Sheets (MSDS) issued by the
manufacturer carefully and check the relevant precautions.
(3) Before making changes to the contents of equipment components and reagents, always check which
chemicals have been used. Wear appropriate safety goggles, laboratory gowns and gloves when using
the equipment.
(4) Minimize contact with chemicals. Wear personal protective equipment when handling chemical
substances.