DC300 Document Camera USER MANUAL 1
Please read this manual carefully before operating the document camera and keep it for reference. PRECAUTIONS NOTICE: PLEASE READ CAREFULLY BEFORE USE Use the document camera under the rated electric conditions. Do not place the document camera on an unstable surface as it may fall, causing injury or damage. Do not place this device directly under sunlight or near heaters. Do not place this device near water. Keep the camera away from acid or alkali gas.
USER MANUAL ............................................................................. 1 1. PARTS IDENTIFICATION .......................................................... 4 2. CONTROL PANEL ..................................................................... 5 3. INPUTS AND OUTPUTS............................................................ 5 4. REMOTE CONTROL.................................................................. 6 5. CONNECTIONS .............................................................
1. PARTS IDENTIFICATION 7 1. Camera 2. LED Light 3. Flexible Camera Arm 4. IR Receiver for Remote Control 5. Interface Panel (VGA Port, Power Input and USB) 6. Control Panel 7.
2. CONTROL PANEL 5 2 6 4 1 4 6 3 5 1. POWER: Turn on/off the power. 2. LAMP: Turn on/off the LED light. 3. AUTO: Perform auto focus, color adjustment and white balance. 4. FOCUS+/-: Adjust focus manually. 5. BRIGHT+/-: Image brightness control. 6. ZOOM+/-: Control image zoom in and zoom out. 3. INPUTS AND OUTPUTS 1. DC 12V: Power input. 2. VGA OUT: VGA (RGB) signal output (15 pin D-SUB). 3. USB: Capture image from connected computer with provided software.
3. REMOTE CONTROL 1. Power: Power document camera on and off 2. Video: Video mode 3. Home/Directional Key: Home button 4. Lamp: Turn LED light On/Off 5. Save: Capture the image in display 6. Recall: Image recall mode enabled, display the saved images 7. Auto: Perform auto focus, color adjustment and white balance 8. Split: Split screen enables the comparison between the frozen image and live image 9.
10. Rotate: Rotate image 11. Sharp+/-: Image sharpness control 12. Computer: Computer mode 13. SXGA/XGA: Switch the output signal between XGA and SXGA 14. Mirror: Output right-and-left, up-and-down mirror image 15. Page +/-: Saved image page up and down when image recall mode is enabled 16. Zoom+/-: Image zoom in and zoom out control 17. Bright+/-: Image brightness control 18. Focus+/-: Adjust focus manually 19. Red+/-: Image chroma control (red) 20.
5. CONNECTIONS 5.1. COMPUTER CONNECTION 5.2.
6. COMMUNICATING WITH COMPUTER 6.1 COMPUTER REQUIREMENTS Minimum PC and software requirements: Operating system: Windows XP CPU: Pentium 4 1.8GHz Physical memory: 512M Video memory: 64M 6.
Read the terms, select "I accept the terms in the license agreement" and click "Next" as shown below: When the following dialogue box appears, click "Next": 10
The default installation directory is Program Files, C: \ Program Files \. Click “Next” to proceed with default installation directory or click “Change” to select a different installation directory: After selecting destination folder, click “OK”.
Then click "Next". Click "Install" to complete installation.
Click "Finish” to complete the installation. Then you will see the following dialogue box, which is an installation package for 2005 C++ environment. If your PC already has this installed, click "No" to exit. 13 Otherwise, click "Yes" to install it.
STARTING SOFTWARE Double click the short cut icon on the desktop to launch the software. IMAGE CAPTURE AND VIDEO RECORDING Left click to capture images. The captured images will be automatically saved into the default destination folder.
Left click to start recording. While recording, the settings button will be inactive. Detailed information is displayed on the software status bar at the bottom of the window. The video is automatically saved in the default folder or pre-set folder. SETTINGS The captured images and recorded videos will be saved automatically into the Images and Videos folders.
the options of recording video with or without sound as shown below: “The length of video that can be recorded” box displays the longest recording time for videos to be saved in the preset path as shown below: Click “save” to complete setting. IMAGE MODIFICATIONS To begin image modifications, click icon. Select Graphic and Move icon allows you to select and move lines, circles, etc to a different position within the image.
Line Clicking icon allows you to create lines within the image. icon allows you to change the setting of the chosen line.
Line Width: Change the width of the line. X, Y: Change the position of the line. Color: Change the color of the line. Width, Height: Change the angle of the line. Rectangles icon allows you to place a rectangle in the image as shown below. icon allows you to change the setting of the chosen rectangle.
Line Width: Change the line width of the rectangle. X, Y: Change the position of the rectangle. Color: Change the line color of the rectangle. Fill Color: Check box to fill color in the rectangle. Width, Height: Change the shape of the rectangle by changing the angle of two adjacent lines of the rectangle. Circular Shapes icon allows you to place circular shapes in the image as shown below. icon allows you to change the setting of the chosen circle.
Line Width: Change the line width of the circle. X, Y: Change the position of the circle. Color: Change the line color of the circle. Fill Color: Check box to fill color in the circle. Width, Height: Change the size of the circle. Freeform icon allows you to place scribbles in the image as shown below.
Line Width: Change the line width of the curve. X, Y: Change the position of the curve. Color: Change the line color of the curve. Graphic Default Setting icon allows you to change the default graphic setting. Deleting Graphic Click to delete the chosen graphic. Delete all the graphics Click to delete all graphics that are placed in the image.
7. FEATURES LIGHT DC300 is RoHS compliant, which means it meets the rigorous European Unionʼs requirements for restriction of the use of certain hazardous substances in electrical and electronic equipment. DC300 uses eco-friendly, low-power LEDʼs which are cool to the touch and mercury free. ZOOM IN AND ZOOM OUT DC300 enables you to view items in immense detail with 9x optical zoom combined with 12x seamless digital zoom.
ROTATE MODE Allows you to rotate images. FREEZE IMAGE Use "Frz" button to freeze and unfreeze the image. MIRROR IMAGE The “Mir” button allows you to show different perspectives of an object. SPLIT SCREEN The “Split” button allows you to split the screen and compare two different images or views of one object side by side. IMAGE SAVE The DC300 can store up to 12 images in its internal memory. You can recall stored images by pressing one of the numerical buttons on the front panel or remote control.
8. SPECIFICATION Model DC300 Sensor 1/3" CMOS Pixels 2 Megapixels Zoom 9x Optical, 12x Digital Frame Rate 12 Shooting Area Max: 16.5"x11.7", Min: 0.1"x0.1" Focus Auto/Manual Output Resolution XGA, SXGA Resolution (Horizontal) ≥750 TV Lines White Balance Auto/Manual Color Adjustment Yes Brightness Adjustment Yes Image Capture Yes, 12 Images Video Recording Yes (via USB) Image Mirror Yes Image Split Yes Image Freeze Yes Text M ode Yes OSD Yes USB 2.
9. TROUBLE-SHOOTING Symptoms Possible causes/counter-measures No image 1. Power cord is not properly connected. 2. Cables are not properly connected. 3. Power switch is not turned on. 4. The built-in fuse is broken: Change fuse. 5. Change the output resolution. Image bending 1. Camera is not in right position, adjust the camera. 2. Press the AUTO Out of focus or blurred 1. The object is too close to the lens. image 2. Focus is on the top point of zoom, press “Zm -“. 3.
10. PACKING LIST Item Quantity Power Cord 1 Power Adaptor (12V/2A) 1 VGA Cable 1 USB Cable (2.0) 1 Remote Control 1 User Manual (CD) 1 Contact: Optoma Technology, Inc., 3178 Laurelview Ct., Fremont, CA, Tel: 510-897-8600, For customer service please call: 1-888-887-5001 All Specifications are subject to change without notice. ©2011 Optoma Technology, Inc. All other names mentioned herein are property of their respective owners.
