Manualshelf

User Manual

ManualsBrandsOptoma Technology ManualsAudio Visual Presentation4200-Lumen Full HD DLP Projector
31323334353637383940
English
31
USING THE PROJECTOR
RGB, or YUV.
Color Space (HDMI input only) : select an appropriate color matrix type from the following: auto,
RGB(0-255), RGB(16-235), and YUV.
White Level: Allow user to adjust White Level when inputting Video signals.
Black Level: Allow user to adjust Black Level when inputting Video signals.
IRE: Allow user to adjust IRE value when inputting Video signals.
IRE is only available with NTSC video format.Note:
Signal
Adjust the signal options.
Automatic : Congure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
Frequency : Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to icker vertically.
Phase : Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or ickers, use this function to correct it.
H. Position : Adjust the horizontal positioning of the image.
V. Position : Adjust the vertical positioning of the image.
Brightness Mode (for lamp base -data)
Adjust the brightness mode settings for lamp-based projectors.
Bright : Choose “Bright” to increase the brightness.
Eco. : Choose “Eco.” to dim the projector lamp which will lower power consumption and extend the
lamp life.
Dynamic : Choose “Dynamic” to dim the lamp power which will be based on brightness level of the
content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will
be extended.
Eco+ : When Eco+ mode is activated, the brightness level of the content is automatically detected to
signicantly reduced lamp power consumption (up to 70%) during periods of inactivity.
Reset
Return the factory default settings for color settings.
Display 3D menu
3D Mode
Use this option to disable the 3D function or select the appropriate the 3D function.
Off : Select “Off” to turn off 3D mode.
DLP-Link : Select to use optimized settings for DLP 3D Glasses.
IR : Select “IR” to use optimized setting for IR 3D Glasses.
3D - 2D
Use this option to specify how the 3D content should appear on the screen.
3D: Display 3D signal.
L (Left): Display the left frame of 3D content.
R (Right): Display the right frame of 3D content.