Firmware Upgrade Procedure for the Optoma HD80 Home Theater Projector 05.04.
Firmware Upgrade Procedure Optoma HD80 Step 1 Power off the projector and disconnect all the cables. Do not plug in the power cord until told to later in one of the steps. Step 2 To download the firmware upgrade software, go to the HD80 product page. On the right-hand side of the page, under “Product Detail” there is a link called “Firmware Upgrade Software.” Right click on the link, and hit “Save Target As...” You will prompted to save a zip file (Note where the file is saved).
Firmware Upgrade Procedure Optoma HD80 Step 5 Select “appcode.hex” and then click “Flash”to execute the firmware upgrade Step 6 When the words “Waiting for target reset” appear on the screen, plug in the power cord to the HD80. Step 7 While the firmware is upgrading, you will see the words “Downloading: Appcode. hex” on the screen.
Firmware Upgrade Procedure Optoma HD80 Step 8 When the firmware upgrade program has completed, you will see the following displayed on the screen Step 9 Disconnect the RS-232 cable and the power cord. The HD80 is now ready to be placed back in your home theater environment.
