Projector User's Manual

English

User Controls



Off: disables the trigger.



On: enables the trigger and the programmable sub-menu. The

sub-menu is accessed by selecting the ON option then press-

ing the ENTER button on the remote control. Checking an op-

tion in the sub-menu will activate the trigger when the selected

display mode is selected. In the example below 16:9 has been

selected – this means that Trigger B will be active when the

projector display mode is set to 16:9. The trigger will be inactive

for all the other display mode options.



Auto235: When AUTO235 is enabled the projector will automat-

ically detect when a 2.35:1 ratio presentation is being shown

and will activate the trigger on this port which, in turn, can be

used to activate a motorised anamorphic lens assembly. The

AUTO235 setting and a motorised anamorphic lens assembly

can be used in this way to provide a fully automated “Constant

Height” projection system