Projector User's Manual

English

Appendices

Lamp Replacing Procedure:

1. Switch off the power to the projector by pressing the Power

button.

2. Allow the projector to cool down at least 30 minutes.

3. Disconnect the power cord.

4. Unlock the lamp cover.



5. Push up and remove the cover.



6. Use a screwdriver to remove the screw from the lamp mod

ule.

7. Pull out the lamp module.



To replace the lamp module, reverse the previous steps.

8. Turn on the projector and do “Lamp Reset” after the lamp

module is replaced.

Lamp Reset: (i)Press “Menu” -> (ii)Select “System” ->

(iii)Select “Lamp Settings” ->(iv)Select “Lamp Reset” ->

(v)Select “Yes”.