OptomaTV Projection Television Owner's Manual

Loosen the three screws on the lamp unit

and pull the lamp module out. (Note:

These screws may be loosened but

cannot be removed from the unit.)

Lamp Change Instructions - RD50

For owners of the RD50, please follow the instructions below when replacing the internal lamp.

For owners of the RD50, please follow the instructions below when replacing the internal

lamp.

Warnings for replacing the internal lamp

1. Warning: Turn off the unit and unplug it before replacing the lamp.

2. Warning: Do not attempt to replace the lamp immediately after the display is turned off. The high

temperature of the lamp could cause serious burns. Allow the lamp to cool down at least two hours

after turning off the display before changing the lamp.

3. Warning: Do not remove the lamp except to replace it. Careless treatment can cause injury or fire.

4. Warning: When replacing the lamp, make sure that no screws or other foreign metal objects fall into

the display's interior as such items may cause fire or electrical shock.

5. Warning: Do not touch the lamp element as it may break and cause serious burns or injuries.

Loosen the three screws on the lamp unit and

pull the lamp module out. (Note: These screws

may be loosened but cannot be removed from

the unit.)

Replace the protective cover and tighten

the screws.

Replace the front decorative cover.

Remove the front decorative cover

Unscrew and remove the lamp module's

protective cover.