Projection Screen TV Owner's Manual

16
Connecting VCR
Your VCR may have different kinds of outputs like RF, composite video and S-Video. Normally
S-Video delivers the best video quality, RF output delivers lower quality video.
If S-Video is available, connect the S-Video output of your VCR to AV1, AV2 or AV3.
If S-Video is not available, connect the composite video output on your VCR to AV1, AV2 or AV3.
Connect the RF output of your VCR to ANT-2 of the TV if this is the only output available or if the
VCR is located very far away from the TV.
If your VCR has a composite video input and you want to record the TV station you are currently
watching, you can optionally connect the AV output of this TV to the video input and audio input
of your VCR.
Installation
ANT Output
ANT-1 Input
ANT-2 Input
Video
S-Video S-Video
L
R
Audio
L
R
Audio
L
R
Audio
L
R
Audio
L
R
Audio
L
R
Audio
Video Video
PC Audio
DVI-D
V
Y
Pb
Pr
V
HH
Pr/B Pr/B
Pb/G
Pb/G
Y/R
Y/R
MONITOR Output
AV1 AV2
PC1 Input
HD1
HD2
SD1
(480i)
Note
Your VCR can only record video if the main TV source is ANT-1 or ANT-2. If the main TV source is AV1, AV2 or AV3,
only composite video is connected, and the video is not copy protected, then your VCR can also record it. Other
higher quality video sources cannot output signals to this composite output for recording even if they are selected.