Owner's manual

34
User Controls
Security Settings

Security:
- On: Choose “On” to enable security verication when turning
on the projector.
- Off: Choose “Off” to be able to switch on the projector with-
out password verication.

Timer - Month/Day/Hour:
This function is used to select the number of hours the projector
can be used (month/day/hour). When you have reached the
limit, you will be asked to enter the password again.

Change Password:
Select subnet mask number.
■ First Time:
1. Press to set the password.
2. The password has to be 4 digits.
3. Use number buttons on the remote to enter your new pass-
word and then press “Enter” key to conrm your password.
Pass-code default value
is “0000” (rst time).
Note
Note