Owner's manual

English
35
User Controls
■ Change Password:
1. Press “Enter” to input old password.
2. Use number button to enter current password and then
press “Enter” to conrm.
3. Enter new password (4 digits in length) using the number
buttons on the remote, then press “Enter” to conrm.
4. Enter new password again and press “Enter” to conrm.
Projector ID
ID denition can be set up by menu (range 01~99), and allow user
control an individual projector by RS232. Refer to page 52 for the
complete list of RS232 commands.