Owner's manual

46
Appendices
6. Select the “Change” button under the “Monitor” tab.
7. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
8. Verify that the resolution setting of the monitor display is lower
than or equal to 1920 x 1080.

If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the comput-
er.
2. Press the appropriate keys listed below for your notebook
manufacturer to send signal out from notebook to projector.
Example: [Fn]+[F4]

If you experience difculty changing resolutions or your monitor
freezes, restart all equipment including the projector.
The screen of the Notebook or PowerBook computer is not
displaying your presentation

If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be reac-
tivated. Refer to your computer’s manual for detailed information.
Unstable or ickering image

Use “Tracking” to correct it. See page 30 for more information.

Change the monitor color setting on your computer.
Image has vertical ickering bar

Use “Phase” to make an adjustment. See page 30 for more informa-
tion.

Check and recongure the display mode of your graphic card to
make it compatible with the projector.
Mac Apple:
System Preference-->Display-->Arrangement-->Mirror
display
Acer

[Fn]+[F5]
Asus  [Fn]+[F8]
Dell

[Fn]+[F8]
Gateway  [Fn]+[F4]
IBM/Lenovo  [Fn]+[F7]
HP/Compaq

[Fn]+[F4]
NEC

[Fn]+[F3]
Toshiba  [Fn]+[F5]