Instruction manual

ManualsBrandsOptoma ManualsProjectorsDE-3072EGA

Table Of Contents

Thank you for purchasing a Optoma projection screen.

Before use, please read instructions carefully. After installation, store instructions for future reference.

Instruction Manual for Smart Controlled Screen

ISO9001:2000

International Certification

Optoma Asia Corporation

5F., No 108, Minchiuan Rd., Xindian City, Taipei 231

Tel: 886-2-2218-2360

Fax: 886-2-2218-2313

www.optoma.com.tw

Optoma USA

715 Sycamore Drive

Milpitas, CA 95035 USA

Tel: 408-383-3700

Fax: 408-383-3702

www.optomausa.com

Optoma Europe Ltd.

42 Caxton Way

The Watford Business Park

Watford Hertfordshire WD18 8QZ UK

Tel: +44 (0) 1923 691 800

Fax: +44 (0) 1923 691 888

www.optoma.co.uk

Summary of content (6 pages)

PAGE 1
Instruction Manual for Smart Controlled Screen Optoma Asia Corporation 5F., No 108, Minchiuan Rd., Xindian City, Taipei 231 Tel: 886-2-2218-2360 Fax: 886-2-2218-2313 www.optoma.com.tw Optoma USA 715 Sycamore Drive Milpitas, CA 95035 USA Tel: 408-383-3700 Fax: 408-383-3702 www.optomausa.com Optoma Europe Ltd. 42 Caxton Way The Watford Business Park Watford Hertfordshire WD18 8QZ UK Tel: +44 (0) 1923 691 800 Fax: +44 (0) 1923 691 888 www.optoma.co.uk Thank you for purchasing a Optoma projection screen.
PAGE 2
Description Floating wall bracket Top panel Aluminum casing Up buckle Baffle Down buckle Fixing screw Screen fabric 1 Bottom rod Accessories Floating wall bracket (2pcs) External IR Receiver (1pc) 5 40mm Tapping screw & cap (8sets) M5x10 Screw (6pcs) Ceiling hanger (2pcs) Trigger line ( 1pc ) Allen key (1pc) Remote Controller (1pc) Instruction mannual (1pc) Optoma Motorized Screen Voltage (V) Application Frequency (Hz) Watts (W) 230V/240V(EU) 50Hz/60Hz 90W/80W Applies up to 120" motori
PAGE 3
Installation Warnings The ceiling or wall used for fixture installation must be secure to prevent the screens from falling. While installing electrical motors, please hire professionals or your local dealer to ensure safety. A misconnection may lead to fire or leaks. Make sure the Fixing screw be fastened when using the wall bracket, to avoid any damage. Keep all infrared wireless products away from fluorescent lighting as it may cause malfunctions.
PAGE 4
3. Loose the Fixing screw to lower down the Baffle all the way. ( Figure 6-7 ) Fixing screw Baffle Figure 6 3 To avoid overheating the motor, do not continually retract and lower the screen for more than 3 minutes. If the motor overheats, it will need a cool down for at least 2 minutes. The motor does not need any lubricants. The drop andretract limit of the screen is factory preset to an optimal configuration. Please ask your local dealer or professionalto adjust settings to avoid damaging the motor.
PAGE 5
How to use Trigger Control: Ceiling hang installation 1. Insert one end of the signal cable into the Trigger jack of the handle controller, and the other end into the DC5V-12V output hole of the projector (Figure 22-23). 2. Press the control switch of the handle controller to the " " location. 3. Switch Manual/Remote Control Button to position "1" (manual stalls). 4.
PAGE 6
Operation Instruction Instructions LED remote controller UP STOP DOWN MICRO-DOWN MICRO-UP Controller button instruction Connecting to the external power: 1.To raise screen press "UP". 1. Tear off the glue cloth fixed on the bottom rod,ensure the bottom rod is not stuck by the casing. 2. Switch on the power (within stated voltage). 2.To hold screen at desired position press "STOP". 3.To lower screen press "DOWN". 4. To raise the screen little at your desired position press MICRO-UP 5.