Operation Manual
English
50
7. Press the Menu button on the projector.
8. Select OSD-> SETUP-> Network-> Enabled.
9. Input the following:
4
IP Address: 192.168.1.2
4
Subnet Mask: 255.255.255.0
4
Gateway: 0.0.0.0
4
DNS Server: 0.0.0.0
10. Press Apply (Enter) to conrm settings.
11. Open a web browser (ex, Microsoft Internet Explorer).
12. In the Address bar, input the IP address: 192.168.1.2.
13. Press Enter.
The projector is setup for remote management. The LAN/RJ45 function
displays as follows.
User Controls