Manualshelf

Use and Care Manual

ManualsBrandsOptoma ManualsElectrical1920p x 1080p DLP Full HD Business Projector with 3600-Lumens
31323334353637383940
English
35
USING THE PROJECTOR
Color Matching
Color White
R
G
B
Reset
Exit
Color Space (non-HDMI input only): Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
White Level: Allow user to adjust White Level when inputting Video signals.
Note: White level can only be adjusted for Video/S-Video input sources.
Black Level: Allow user to adjust Black Level when inputting Video signals.
Note: Black level can only be adjusted for Video/S-Video input sources.
IRE: Allow user to adjust IRE value when inputting Video signals.
Note:
IRE is only available with NTSC video format.
IRE can only be adjusted for Video input sources.
Signal
Adjust the signal options.
Automatic: Congure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
Frequency: Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to icker vertically.
Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or ickers, use this function to correct it.
H. Position: Adjust the horizontal positioning of the image.
V. Position: Adjust the vertical positioning of the image.
Exit: Exit the “Signal” menu.
Note: Signal can only be adjusted for RGB/Component input sources.
Brightness Mode (Lamp base data)
Adjust the brightness mode settings for lamp-based projectors.
Bright: Choose “Bright” to increase the brightness.
Eco.: Choose “Eco.” to dim the projector lamp which will lower power consumption and extend the
lamp life.
Dynamic: Choose “Dynamic” to dim the lamp power which will be based on brightness level of the
content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will
be extended.
Eco+: When Eco+ mode is activated, the brightness level of the content is automatically detected to
signicantly reduced lamp power consumption (up to 70%) during periods of inactivity.