Use and Care Manual

English

USING THE PROJECTOR

 PJLink applied for trademark and logo registration in Japan, the United States of America, and other

countries by JBMIA.

The projector is supported by the specied commands of the Crestron Electronics controller and related software,

for example RoomView®.

http://www.crestron.com/

This projector is compliant to support Extron device(s) for reference.

http://www.extron.com/

This projector is supported by AMX ( Device Discovery ).

http://www.amx.com/

This projector supports all commands of PJLink Class1 (Version 1.00).

http://pjlink.jbmia.or.jp/english/

For more detailed information about the various types of external devices which can be connected to the LAN /

RJ45 port and remote control the projector, as well as the supported commands for these external devices, please

contact the Support-Service directly.

LAN RJ45

1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop).

2. On the PC (Laptop), select Start > Control Panel > Network Connections.