Use and Care Manual
English
50
USING THE PROJECTOR
8. Open on projector Network > LAN.
9. Enter the following connection parameters:
± DHCP: Off
± IP Address: 192.168.0.100
± Subnet Mask: 255.255.255.0
± Gateway: 192.168.0.254
± DNS: 192.168.0.1
10. Press “Enter” to conrm settings.
11. Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher
installed.
12. In the Address bar, input the projector’s IP address: 192.168.0.100.
13. Press “Enter”.
The projector is setup for remote management. The LAN / RJ45 function displays as follows:
Information page
Main page