Owners manual

English
32
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Information
Regulatory
Serial Number
Source
Resolution 00x00
Refresh Rate 0.00Hz
Display Mode
Power mode
(Standby)
Lamp Hours
Bright 0H
Eco 0H
Dynamic 0H
Eco+ 0H
Total
Projector ID 00~99
Filter Usage
Hours
Brightness
Mode
FW Version
System
MCU
Note:
 The “Lamp Reset” in OSD will only reset both Lamp Hours in OSD and Lamp Hours in service mode.
The Projection Hours in service mode will not be reset.
 Each display mode can be adjusted and saved the value.
 In 3D timing mode, the zoom/edge mask will be disabled to prevent from image break.