User Manual

English
33
USING THE PROJECTOR
Signal
Adjust the signal options.
 Automatic: Congure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
 Frequency: Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to icker vertically.
 Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or ickers, use this function to correct it.
 H. Position: Adjust the horizontal positioning of the image.
 V. Position: Adjust the vertical positioning of the image.
 Exit: Exit the “Signal” menu.
Note: This menu is only available if the input source is RGB/Component.
Enhanced Gaming
Enable this feature to reduce response times (input latency) during gaming to 16ms and 8.4ms.
Note: 16ms for 1080p 60Hz; 8.4ms for 1080p 120Hz.
Brightness Mode
Adjust the brightness mode settings for lamp-based projectors.
 Bright: Choose “Bright” to increase the brightness.
 Eco.: Choose “Eco.” to dim the projector lamp which will lower power consumption and extend the
lamp life.
 Dynamic: Choose “Dynamic” to dim the lamp power which will be based on brightness level of the
content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will
be extended.
 Eco+: When Eco+ mode is activated, the brightness level of the content is automatically detected to
signicantly reduced lamp power consumption (up to 70%) during periods of inactivity.
Reset
Return the factory default settings for color settings.
Display 3D menu
3D Mode
Use this option to disable or enable the 3D function.
 Off: Select “Off” to turn off 3D mode.
 On: Select “On” to turn on 3D mode.
3D Tech.
Use this option to select 3D technology.
 DLP-Link: Select to use optimized settings for DLP 3D Glasses.
 3D Sync: Select to use optimized settings for IR, RF or polarized 3D Glasses.