User Guide

English

Installation

Powering On the Projector

1. Remove the lens cap. 

2. Ensure that the power cord and signal cable are securely

connected. The Power LED will ash green.

3. Turn on the lamp by pressing “Standby/ON” button on

the control panel. And the Power LED will turn green.

4. Turn on your source (computer, notebook, video player,

etc.). The projector will detect your source automatically .

If you connect multiple sources at the same time, use the

“Source” button on the control panel or direct source key

on remote control to switch.

Powering On/Off the Projector

Turn on the projector

rst and then the signal

sources.

Standby/ON

Lens Cap