User Guide

English

Appendices

Problem: The image is stretched when displaying 16:9 DVD

The projector automatically detects 16:9 DVD and adjusts the aspect

ratio by digitizing to full screen with 4:3 default setting.

If the image is still stretched, you will also need to adjust the aspect

ratio by referring to the following:



Please select 4:3 aspect ratio type on your DVD player if you are

playing a 16:9 DVD.



If you can’t select 4:3 aspect ratio type on your DVD player, please

select 4:3 aspect ratio in the on screen menu.

Problem: Image is reversed



Select “Setup



Projection” from the OSD and adjust the projection

direction.

Problem: Lamp burns out or makes a popping sound



When the lamp reaches its end of life, it will burn out and may

make a loud popping sound. If this happens, the projector will not

turn on until the lamp module has been replaced. To replace the

lamp, follow the procedures in the “Replacing the Lamp”.

Problem: LED lighting message

Steady light



No light



Message

Power-LED

Temp-LED Lamp-LED

(Green)

Standby State

(Input power cord)

Flashing

Warming

Normal Mode

Cooling

Error (Lamp failed)

Error (Fan failed) Flashing

Error (Over Temp.)