Operation Manual

English
21
Control Panel
.
Keystone +
.
Keystone -
.
Source Re-Sync
.
Enter/Help Menu AV-Mute
PowerLampTemp
Power
Using the Control Panel
▲/Keystone+
(Up arrow)
•Adjust the image Keystone positively.
• Navigates and changes settings in the OSD.
◄/Source
(Left arrow)
• Press Source to select an input signal.
• Navigates and changes settings in the OSD.
Enter / Help
Conrm your item selection./
Press to activate Help function
(disabled in OSD menus).
See page 51 Appendices for help function.
►/Re-Sync
(Right arrow)
•Automatically synchronizes the projector to
the input source.
• Navigates and changes settings in the OSD.
Menu
Press Menu to launch the on-screen display
(OSD) menu. To exit OSD, Press Menu again.
AV-Mute Momentarily turns off / on the audio and video.
Power
Refer to the “Power On/Off the Projector”
section on page 15.
Power LED
Green
Unit is powered on and working
correctly .
Flashing
Green
Unit is on stand-by/cooling down.
Off Unit is powered off.
Lamp LED
On
Lamp not ready—do not press the
power button.
Off Lamp is in normal state.
Temp LED
On System over temperature
Off Normal state
User Controls