Operation Manual

EN-19
Connecting Video source devices
You can connect your projector to various Video source devices that provide
any one of the following output sockets:
 HDMI
 Component Video
 S-Video
 Video (composite)
You need only connect the projector to a Video source device using just one
of the above connecting methods, however each provides a different level of
video quality. The method you choose will most likely depend upon the avail-
ability of matching terminals on both the projector and the Video source
device as described below:
Note
 Not all models have HDMI input jack, please check your projector before connecting
Terminal name Terminal appearance Reference Picture quality
HDMI HDMI “Connecting an
HDMI source
device” on
page 20
Best
Component
Video
VGA1-IN/YPbPr or
VGA2-IN/YPbPr
“Connecting a
Component Video
source device” on
page 18
Better
S-Video S-VIDEO “Connecting an
S-Video source
device” on
page 21
Good
Video VIDEO “Connecting a
composite Video
source device” on
page 22
Normal