Use and Care Manual

English
30
USING THE PROJECTOR
Gamma
Set up gamma curve type. After the initial setup and ne tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
 Film: For home theater.
 Video: For video or TV source.
 Graphics: For PC / Photo source.
 Standard(2.2): For standardized setting.
 1.8/ 2.0/ 2.4: For specic PC / Photo source.
Color Settings
Congure the color settings.
 BrilliantColor
TM
: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
 Color Temperature (data-mode only): Select a color temperature from Warm, Standard, Cool, or
Cold.
 Color Matching: Modify the image color settings Hue, Saturation, and Gain when the Color is red (R),
green (G), black (B), cyan (C), yellow (Y), magenta (M).
± Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), and magenta (M) level of
the image.
± Hue: Adjust the color balance of red and green when Color is red, green, blue, cyan, yellow, and
magenta.
± Saturation: Adjust the image saturation when Color is red, green, blue, cyan, yellow, and
magenta.
± Gain: Adjust the image brightness when Color is red, green, blue, cyan, yellow, and magenta.
± Reset: Return the factory default settings for color matching.
± Exit: Exit the “Color Matching” menu.
 Color Matching: Modify the image color settings Red, Green, and Blue when the Color is white (W).
± Color: Adjust the red (R), green (G), blue (B) level of the image.
± Red: Adjust the gain of red when Color is white.
± Green: Adjust the gain of green when Color white.
± Blue: Adjust the gain of blue when Color is white.
± Reset: Return the factory default settings for color matching.
± Exit: Exit the “Color Matching” menu.
 RGB Gain/Bias: This settings allows to congure the brightness (gain) and contrast (bias) of an
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the “RGB Gain/Bias” menu.
 Color Space (HDMI input only): Select an appropriate color matrix type from the following: Auto,
(0-255), and (16-235).
DynamicBlack
Dynamic Black enables the projector to automatically optimize the brightness of the display during dark / light
movie scenes to be shown in incredible detail.